Files
onstep/OnStepX.ino
T

164 lines
4.2 KiB
Arduino
Raw Normal View History

2026-05-20 21:48:13 +02:00
/*
* Title OnStepX
* by Howard Dutton
*
* Copyright (C) 2021-2026 Howard Dutton
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
* Description:
* Full featured telescope control for
* Equatorial and Alt-Az mounts
* Rotator
* Focusers
* Accessories (automatic covers, dew heaters, etc.)
*
* Author: Howard Dutton
* http://www.stellarjourney.com
* hjd1964@gmail.com
*
* Revision history, and newer versions:
* See GitHub: https://github.com/hjd1964/OnStep
*
* Documentation:
* https://groups.io/g/onstep/wiki/home
*
* Discussion, Questions, ...etc
* https://groups.io/g/onstep
*/
// Use tabs "Config..." to configure OnStep to your requirements
// Firmware version ----------------------------------------------------------------------------------------------------------------
#define FirmwareName "On-Step"
#define FirmwareVersionMajor 10
#define FirmwareVersionMinor 28 // minor version 00 to 99
#define FirmwareVersionPatch "i" // for example major.minor patch: 10.03c
#define FirmwareVersionConfig 6 // internal, for tracking configuration file changes
#include "src/Common.h"
#include "src/Validate.h"
#include "src/lib/nv/Nv.h"
#include "src/lib/analog/Analog.h"
#include "src/lib/sense/Sense.h"
#include "src/lib/tasks/OnTask.h"
#include "src/telescope/Telescope.h"
extern Telescope telescope;
#include "src/plugins/Plugins.config.h"
#if DEBUG == PROFILER
extern void profiler();
#endif
void sensesPoll() {
sense.poll();
}
void setup() {
//pinMode(SHARED_ENABLE_PIN, OUTPUT);
//digitalWrite(SHARED_ENABLE_PIN, HIGH);
#if ADDON_SELECT_PIN != OFF
pinMode(ADDON_SELECT_PIN, OUTPUT);
digitalWrite(ADDON_SELECT_PIN, HIGH);
#endif
#if DEBUG != OFF
SERIAL_DEBUG.begin(SERIAL_DEBUG_BAUD);
delay(2000);
#endif
// let any special processing the pinmap needs happen
#ifdef PIN_INIT
PIN_INIT();
#endif
// say hello
VLF("");
VF("MSG: OnStepX, version "); V(FirmwareVersionMajor); V("."); V(FirmwareVersionMinor); VL(FirmwareVersionPatch);
VF("MSG: OnStepX, MCU "); VLF(MCU_STR);
VF("MSG: OnStepX, pinmap "); VLF(PINMAP_STR);
// start low level hardware
VLF("MSG: System, HAL initialize");
HAL_INIT();
WIRE_INIT();
analog.begin();
nv().setGate(&xBusy);
if (!nv().init()) {
DLF("ERR: Setup, NV (EEPROM/FRAM/Flash/etc.) device not found!");
}
delay(2000);
#if defined(NV_WIPE) && NV_WIPE == ON
nv().wipe();
#endif
// start input sense polling task
int pollingRate = round((1000.0F/HAL_FRACTIONAL_SEC)/2.0F);
if (pollingRate < 1) pollingRate = 1;
VF("MSG: System, start input sense service task (rate "); V(pollingRate); VF("ms priority 7)... ");
if (tasks.add(pollingRate, 0, true, 7, sensesPoll, "SysSens")) { VLF("success"); } else { VLF("FAILED!"); }
// start telescope object
telescope.init(FirmwareName, FirmwareVersionMajor, FirmwareVersionMinor, FirmwareVersionPatch, FirmwareVersionConfig);
// start command channel tasks
commandChannelInit();
tasks.yield(2000);
// start any plugins
#if PLUGIN1 != OFF
PLUGIN1.init();
#endif
#if PLUGIN2 != OFF
PLUGIN2.init();
#endif
#if PLUGIN3 != OFF
PLUGIN3.init();
#endif
#if PLUGIN4 != OFF
PLUGIN4.init();
#endif
#if PLUGIN5 != OFF
PLUGIN5.init();
#endif
#if PLUGIN6 != OFF
PLUGIN6.init();
#endif
#if PLUGIN7 != OFF
PLUGIN7.init();
#endif
#if PLUGIN8 != OFF
PLUGIN8.init();
#endif
// start task manager debug events
#if DEBUG == PROFILER
tasks.add(142, 0, true, 7, profiler, "Profilr");
#endif
sense.poll();
telescope.ready = true;
}
void loop() {
tasks.yield();
}