init
This commit is contained in:
Executable
+6
@@ -0,0 +1,6 @@
|
||||
// HAL global variables
|
||||
#include <Arduino.h>
|
||||
|
||||
// Must match the externs in HAL_FAST_TICKS.h exactly
|
||||
uint32_t _halTicksPerSecond = 1000000UL;
|
||||
uint32_t _halTicksPerMicro = 1;
|
||||
Executable
+190
@@ -0,0 +1,190 @@
|
||||
/*
|
||||
* Hardware Abstraction Layer (HAL) for OnStep
|
||||
*
|
||||
* Copyright (C) 2018 Khalid Baheyeldin
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
// null decoration for non-ESP processors
|
||||
#ifndef IRAM_ATTR
|
||||
#define IRAM_ATTR
|
||||
#endif
|
||||
|
||||
#ifndef ICACHE_RAM_ATTR
|
||||
#define ICACHE_RAM_ATTR
|
||||
#endif
|
||||
|
||||
#ifndef FPSTR
|
||||
#define FPSTR
|
||||
#endif
|
||||
|
||||
#include "HAL_FAST_TICKS.h"
|
||||
|
||||
#if defined(__AVR_ATmega328P__)
|
||||
#define MCU_STR "AtMega328"
|
||||
#include "atmel/Mega328.h"
|
||||
|
||||
#elif defined(__AVR_ATmega1280__)
|
||||
#define MCU_STR "Mega1280"
|
||||
#include "atmel/Mega2560.h"
|
||||
|
||||
#elif defined(__AVR_ATmega2560__)
|
||||
#define MCU_STR "Mega2560"
|
||||
#include "atmel/Mega2560.h"
|
||||
|
||||
#elif defined(ARDUINO_UNOWIFIR4)
|
||||
// Arduino UNO R4 WIFI
|
||||
#define MCU_STR "RENESAS RA4M1 (Arduino UNO R4 WIFI)"
|
||||
#include "esp32/ESP32UnoR4WiFi.h"
|
||||
|
||||
#elif defined(ARDUINO_ARCH_SAMD)
|
||||
// ARDUINO M0
|
||||
#define MCU_STR "ARDUINO M0"
|
||||
#include "arduinoM0/ArduinoM0.h"
|
||||
|
||||
#elif defined(ESP32) && ESP_ARDUINO_VERSION >= 0x30000
|
||||
// ESP32 w/libraries 3.x
|
||||
#define MCU_STR "ESP32"
|
||||
#include "esp/ESP32Libraries3.h"
|
||||
|
||||
#elif defined(ESP32) && ESP_ARDUINO_VERSION >= 0x20000
|
||||
// ESP32 w/libraries 2.x
|
||||
#define MCU_STR "ESP32"
|
||||
#include "esp/ESP32Libraries2.h"
|
||||
|
||||
#elif defined(ESP8266)
|
||||
// ESP8266
|
||||
#define MCU_STR "ESP8266"
|
||||
#include "esp/ESP8266.h"
|
||||
|
||||
#elif defined(STM32F103xB)
|
||||
// STM32F103C8/CB: 72MHz, 128K flash, 64K RAM, ARM Cortex M3
|
||||
#define MCU_STR "STM32F103"
|
||||
#include "stm32/STM32F103.h"
|
||||
|
||||
#elif defined(STM32F303xC)
|
||||
// RobotDyn BlackPill STM32F303, 256K flash, ARM Cortex M4 (STM32duino board manager)
|
||||
#define MCU_STR "STM32F303"
|
||||
#include "stm32/STM32F303.h"
|
||||
|
||||
#elif defined(STM32F401xC)
|
||||
// Blackpill board with STM32F401CC
|
||||
#define MCU_STR "STM32F401"
|
||||
#include "stm32/STM32F4x1.h"
|
||||
|
||||
#elif defined(STM32F411xE)
|
||||
// Blackpill board with STM32F411CE
|
||||
#define MCU_STR "STM32F411"
|
||||
#include "stm32/STM32F4x1.h"
|
||||
|
||||
#elif defined(STM32F407xx)
|
||||
// BTT SKR PRO board with STM32F407
|
||||
#define MCU_STR "STM32F407"
|
||||
#include "stm32/STM32F407.h"
|
||||
|
||||
#elif defined(STM32F446xx)
|
||||
// FYSETC S6 board with STM32F446
|
||||
#define MCU_STR "STM32F446"
|
||||
#include "stm32/STM32F446.h"
|
||||
|
||||
#elif defined(STM32H723xx)
|
||||
#define MCU_STR "STM32H723"
|
||||
#include "stm32/STM32H7xx.h"
|
||||
|
||||
#elif defined(STM32H743xx)
|
||||
// WeAct Studio board with STM32H743
|
||||
#define MCU_STR "STM32H743"
|
||||
#include "stm32/STM32H7xx.h"
|
||||
|
||||
#elif defined(STM32H750xx)
|
||||
// WeAct Studio board with STM32H750
|
||||
#define MCU_STR "STM32H750"
|
||||
#include "stm32/STM32H7xx.h"
|
||||
|
||||
#elif defined(_mk20dx128_h_) || defined(__MK20DX128__)
|
||||
// Teensy 3.0
|
||||
#define MCU_STR "Teensy3.0"
|
||||
#include "teensy/Teensy3.2.h"
|
||||
|
||||
#elif defined(__MK20DX256__)
|
||||
// Teensy 3.2
|
||||
#define MCU_STR "Teensy3.2"
|
||||
#include "teensy/Teensy3.2.h"
|
||||
|
||||
#elif defined(__MK64FX512__)
|
||||
// Teensy 3.5
|
||||
#define MCU_STR "Teensy3.5"
|
||||
#include "teensy/Teensy3.5.h"
|
||||
|
||||
#elif defined(__MK66FX1M0__)
|
||||
// Teensy 3.6
|
||||
#define MCU_STR "Teensy3.6"
|
||||
#include "teensy/Teensy3.6.h"
|
||||
|
||||
#elif defined(ARDUINO_TEENSY40)
|
||||
// Teensy 4.0
|
||||
#define MCU_STR "Teensy4.0"
|
||||
#include "teensy/Teensy4.0.h"
|
||||
|
||||
#elif defined(ARDUINO_TEENSY41)
|
||||
// Teensy 4.1
|
||||
#define MCU_STR "Teensy4.1"
|
||||
#include "teensy/Teensy4.1.h"
|
||||
|
||||
#elif defined(ARDUINO_TEENSY_MICROMOD)
|
||||
// Teensy MicroMod
|
||||
#define MCU_STR "TeensyMicroMod"
|
||||
#include "teensy/Teensy4.1.h"
|
||||
|
||||
#elif defined(ARDUINO_ARCH_RP2040)
|
||||
// Raspberry pi pico
|
||||
#define MCU_STR "Raspberry Pi Pico"
|
||||
#include "mbed/Rpi2040.h"
|
||||
|
||||
#elif defined(ARDUINO_ARCH_RP2350)
|
||||
// Raspberry pi pico2
|
||||
#define MCU_STR "Raspberry Pi Pico2"
|
||||
#include "mbed/Rpi2350.h"
|
||||
|
||||
#else
|
||||
// Generic
|
||||
#warning "Unknown Platform! If this is a new platform, it would probably do best with a new HAL designed for it."
|
||||
#define MCU_STR "Generic (Unknown)"
|
||||
#include "default/Default.h"
|
||||
#endif
|
||||
|
||||
#include "HAL_ANALOG.h"
|
||||
|
||||
#ifndef HAL_INIT
|
||||
#define HAL_INIT() do { HAL_FAST_TICKS_INIT(); } while (0)
|
||||
#endif
|
||||
|
||||
// baseline critical task timing
|
||||
#ifdef HAL_FRACTIONAL_SEC
|
||||
#define FRACTIONAL_SEC HAL_FRACTIONAL_SEC
|
||||
#else
|
||||
#define FRACTIONAL_SEC 100.0F
|
||||
#endif
|
||||
|
||||
// progmem standin for platforms that don't have it
|
||||
#ifndef CAT_ATTR
|
||||
#define CAT_ATTR
|
||||
#endif
|
||||
|
||||
// default I2C interface
|
||||
#if defined(HAL_WIRE_CLOCK)
|
||||
#define HAL_WIRE_SET_CLOCK() HAL_WIRE.setClock(HAL_WIRE_CLOCK)
|
||||
#else
|
||||
#define HAL_WIRE_SET_CLOCK()
|
||||
#endif
|
||||
Executable
+73
@@ -0,0 +1,73 @@
|
||||
|
||||
// Analog HAL capabilities (defaults) ----------------------------------------------------------------
|
||||
// Defaults: no per-pin control, no global reconfig (safe)
|
||||
#pragma once
|
||||
|
||||
#ifndef HAL_HAS_PER_PIN_PWM_RESOLUTION
|
||||
#define HAL_HAS_PER_PIN_PWM_RESOLUTION 0
|
||||
#endif
|
||||
#ifndef HAL_HAS_PER_PIN_PWM_FREQUENCY
|
||||
#define HAL_HAS_PER_PIN_PWM_FREQUENCY 0
|
||||
#endif
|
||||
#ifndef HAL_HAS_GLOBAL_PWM_RESOLUTION
|
||||
#define HAL_HAS_GLOBAL_PWM_RESOLUTION 0
|
||||
#endif
|
||||
#ifndef HAL_HAS_GLOBAL_PWM_FREQUENCY
|
||||
#define HAL_HAS_GLOBAL_PWM_FREQUENCY 0
|
||||
#endif
|
||||
|
||||
#ifndef HAL_HAS_PER_PIN_ADC_RESOLUTION
|
||||
#define HAL_HAS_PER_PIN_ADC_RESOLUTION 0
|
||||
#endif
|
||||
#ifndef HAL_HAS_GLOBAL_ADC_RESOLUTION
|
||||
#define HAL_HAS_GLOBAL_ADC_RESOLUTION 0
|
||||
#endif
|
||||
|
||||
#ifndef HAL_ALLOW_GLOBAL_PWM_RECONFIG
|
||||
#define HAL_ALLOW_GLOBAL_PWM_RECONFIG 0
|
||||
#endif
|
||||
#ifndef HAL_ALLOW_GLOBAL_ADC_RECONFIG
|
||||
#define HAL_ALLOW_GLOBAL_ADC_RECONFIG 0
|
||||
#endif
|
||||
|
||||
// reasonable bounds (overridden per platform below)
|
||||
#ifndef HAL_PWM_BITS_MIN
|
||||
#define HAL_PWM_BITS_MIN 1
|
||||
#endif
|
||||
#ifndef HAL_PWM_BITS_MAX
|
||||
#define HAL_PWM_BITS_MAX 16
|
||||
#endif
|
||||
#ifndef HAL_ADC_BITS_MIN
|
||||
#define HAL_ADC_BITS_MIN 1
|
||||
#endif
|
||||
#ifndef HAL_ADC_BITS_MAX
|
||||
#define HAL_ADC_BITS_MAX 12
|
||||
#endif
|
||||
#ifndef HAL_PWM_HZ_MIN
|
||||
#define HAL_PWM_HZ_MIN 1U
|
||||
#endif
|
||||
#ifndef HAL_PWM_HZ_MAX
|
||||
#define HAL_PWM_HZ_MAX 40000U
|
||||
#endif
|
||||
|
||||
// some validation
|
||||
#if HAL_PWM_BITS_MIN < 1 || HAL_PWM_BITS_MIN > 32
|
||||
#error "Error: HAL_PWM_BITS_MIN outside of 1 to 32 range."
|
||||
#endif
|
||||
#if HAL_PWM_BITS_MAX < 1 || HAL_PWM_BITS_MAX > 32
|
||||
#error "Error: HAL_PWM_BITS_MAX outside of 1 to 32 range."
|
||||
#endif
|
||||
#if HAL_ADC_BITS_MIN < 1 || HAL_ADC_BITS_MIN > 32
|
||||
#error "Error: HAL_ADC_BITS_MIN outside of 1 to 32 range."
|
||||
#endif
|
||||
#if HAL_ADC_BITS_MAX < 1 || HAL_ADC_BITS_MAX > 32
|
||||
#error "Error: HAL_ADC_BITS_MAX outside of 1 to 32 range."
|
||||
#endif
|
||||
|
||||
// global default ranges
|
||||
#ifndef ANALOG_READ_RANGE
|
||||
#define ANALOG_READ_RANGE 1023U // 2^n - 1
|
||||
#endif
|
||||
#ifndef ANALOG_WRITE_RANGE
|
||||
#define ANALOG_WRITE_RANGE 255U // 2^n - 1
|
||||
#endif
|
||||
Executable
+248
@@ -0,0 +1,248 @@
|
||||
// -------------------------------------------------------------------------------------------------
|
||||
// HAL_FAST_TICKS.h
|
||||
//
|
||||
// Fast ticks: 32-bit wrapping timestamp intended for ISRs / high-rate timing.
|
||||
//
|
||||
// Interface:
|
||||
// HAL_FAST_TICKS_INIT() call once at startup (safe no-op where not needed)
|
||||
// HAL_FAST_TICKS() returns uint32_t ticks (wrapping OK)
|
||||
// HAL_TICKS_PER_SECOND() returns uint32_t tick frequency in Hz (cached)
|
||||
// delayNanoseconds(ns) short busy-wait delay (NOT intended for ISR use)
|
||||
// nanoseconds32() convenience conversion (NOT intended for ISR use)
|
||||
//
|
||||
// Policy (as requested):
|
||||
// - Teensy 3.x/4.x: use DWT->CYCCNT (enable once).
|
||||
// - ESP32 Xtensa (ESP32/S2/S3): use CCOUNT.
|
||||
// - ESP8266: use ESP.getCycleCount().
|
||||
// - STM32: most use micros(), STM32H723/H743/H750 use DWT->CYCCNT.
|
||||
// - ESP32 RISC-V (C3/C6/H2): use micros().
|
||||
// - Everything else: use micros().
|
||||
//
|
||||
// Notes:
|
||||
// - Tick frequency is cached in _halTicksPerSecond/_halTicksPerMicro (defined in HAL.cpp).
|
||||
// -------------------------------------------------------------------------------------------------
|
||||
#pragma once
|
||||
|
||||
#include <stdint.h>
|
||||
#include <Arduino.h>
|
||||
|
||||
// Make header self-contained (HAL.h may not have been included yet)
|
||||
#ifndef IRAM_ATTR
|
||||
#define IRAM_ATTR
|
||||
#endif
|
||||
|
||||
// Must be defined once in HAL.cpp:
|
||||
// uint32_t _halTicksPerSecond = 1000000UL;
|
||||
// uint32_t _halTicksPerMicro = 1;
|
||||
extern uint32_t _halTicksPerSecond;
|
||||
extern uint32_t _halTicksPerMicro;
|
||||
|
||||
// ----------------------------------------
|
||||
// Platform identification helpers
|
||||
// ----------------------------------------
|
||||
|
||||
// Teensy (3.x/4.x) detection
|
||||
#if defined(TEENSYDUINO) || defined(ARDUINO_TEENSY40) || defined(ARDUINO_TEENSY41) || \
|
||||
defined(ARDUINO_TEENSY_MICROMOD) || \
|
||||
defined(__MK20DX128__) || defined(__MK20DX256__) || defined(__MK64FX512__) || defined(__MK66FX1M0__) || \
|
||||
defined(__IMXRT1062__)
|
||||
#define HAL_IS_TEENSY 1
|
||||
#else
|
||||
#define HAL_IS_TEENSY 0
|
||||
#endif
|
||||
|
||||
// STM32 H7 detection (STM32duino)
|
||||
#if defined(ARDUINO_ARCH_STM32) && (defined(STM32H723xx) || defined(STM32H743xx) || defined(STM32H750xx))
|
||||
#define HAL_IS_STM32_H7 1
|
||||
#else
|
||||
#define HAL_IS_STM32_H7 0
|
||||
#endif
|
||||
|
||||
// ESP32 RISC-V detection (C3/C6/H2)
|
||||
#if (defined(ARDUINO_ARCH_ESP32) || defined(ESP_PLATFORM)) && (defined(__riscv) || defined(__riscv__))
|
||||
#define HAL_IS_ESP32_RISCV 1
|
||||
#else
|
||||
#define HAL_IS_ESP32_RISCV 0
|
||||
#endif
|
||||
|
||||
// ESP32 Xtensa detection (ESP32/S2/S3)
|
||||
#if (defined(ARDUINO_ARCH_ESP32) || defined(ESP_PLATFORM)) && (defined(__XTENSA__) || defined(__xtensa__))
|
||||
#define HAL_IS_ESP32_XTENSA 1
|
||||
#else
|
||||
#define HAL_IS_ESP32_XTENSA 0
|
||||
#endif
|
||||
|
||||
// ----------------------------------------
|
||||
// Platform-specific fast tick source
|
||||
// ----------------------------------------
|
||||
|
||||
// ---------- ESP32 Xtensa: CCOUNT ----------
|
||||
#if HAL_IS_ESP32_XTENSA
|
||||
|
||||
static inline uint32_t IRAM_ATTR HAL_FAST_TICKS() {
|
||||
uint32_t ccount;
|
||||
__asm__ __volatile__("rsr %0, ccount" : "=a"(ccount));
|
||||
return ccount;
|
||||
}
|
||||
|
||||
static inline uint32_t HAL_TICKS_PER_SECOND() { return _halTicksPerSecond; }
|
||||
|
||||
static inline void HAL_FAST_TICKS_INIT() {
|
||||
#if defined(F_CPU)
|
||||
_halTicksPerSecond = (uint32_t)F_CPU;
|
||||
#else
|
||||
_halTicksPerSecond = (uint32_t)ESP.getCpuFreqMHz() * 1000000UL;
|
||||
#endif
|
||||
_halTicksPerMicro = _halTicksPerSecond / 1000000UL;
|
||||
if (_halTicksPerMicro == 0) _halTicksPerMicro = 1;
|
||||
}
|
||||
|
||||
// ---------- ESP8266: cycle count ----------
|
||||
#elif defined(ESP8266)
|
||||
|
||||
static inline uint32_t IRAM_ATTR HAL_FAST_TICKS() {
|
||||
return (uint32_t)ESP.getCycleCount();
|
||||
}
|
||||
|
||||
static inline uint32_t HAL_TICKS_PER_SECOND() { return _halTicksPerSecond; }
|
||||
|
||||
static inline void HAL_FAST_TICKS_INIT() {
|
||||
#if defined(F_CPU)
|
||||
_halTicksPerSecond = (uint32_t)F_CPU; // typically 80 or 160 MHz
|
||||
#else
|
||||
_halTicksPerSecond = 80000000UL;
|
||||
#endif
|
||||
_halTicksPerMicro = _halTicksPerSecond / 1000000UL;
|
||||
if (_halTicksPerMicro == 0) _halTicksPerMicro = 1;
|
||||
}
|
||||
|
||||
// ---------- Teensy 3.x/4.x: DWT->CYCCNT ----------
|
||||
#elif HAL_IS_TEENSY
|
||||
|
||||
static inline void HAL_FAST_TICKS_INIT() {
|
||||
#if defined(DWT) && defined(CoreDebug) && defined(DWT_CTRL_CYCCNTENA_Msk)
|
||||
CoreDebug->DEMCR |= CoreDebug_DEMCR_TRCENA_Msk;
|
||||
if ((DWT->CTRL & DWT_CTRL_CYCCNTENA_Msk) == 0) {
|
||||
DWT->CYCCNT = 0; // optional but recommended
|
||||
DWT->CTRL |= DWT_CTRL_CYCCNTENA_Msk;
|
||||
__DSB(); __ISB();
|
||||
}
|
||||
#if defined(F_CPU)
|
||||
_halTicksPerSecond = (uint32_t)F_CPU;
|
||||
#else
|
||||
_halTicksPerSecond = 1000000UL;
|
||||
#endif
|
||||
#else
|
||||
// fallback tick source is micros()
|
||||
_halTicksPerSecond = 1000000UL;
|
||||
#endif
|
||||
|
||||
_halTicksPerMicro = _halTicksPerSecond / 1000000UL;
|
||||
if (_halTicksPerMicro == 0) _halTicksPerMicro = 1;
|
||||
}
|
||||
|
||||
static inline uint32_t HAL_TICKS_PER_SECOND() { return _halTicksPerSecond; }
|
||||
|
||||
static inline uint32_t IRAM_ATTR HAL_FAST_TICKS() {
|
||||
#if defined(DWT) && defined(DWT_CTRL_CYCCNTENA_Msk)
|
||||
return (uint32_t)DWT->CYCCNT;
|
||||
#else
|
||||
return (uint32_t)micros();
|
||||
#endif
|
||||
}
|
||||
|
||||
// - STM32H7: use DWT->CYCCNT (enable once).
|
||||
// - Other STM32: use micros().
|
||||
#elif HAL_IS_STM32_H7
|
||||
|
||||
// Some STM32 cores expose these via CMSIS headers already included by Arduino.h.
|
||||
// If not, you may need: #include "core_cm7.h"
|
||||
|
||||
static inline void HAL_FAST_TICKS_INIT() {
|
||||
// Ensure SystemCoreClock is up to date (harmless if already correct).
|
||||
#if defined(SystemCoreClockUpdate)
|
||||
SystemCoreClockUpdate();
|
||||
#endif
|
||||
|
||||
// Enable DWT CYCCNT
|
||||
#if defined(DWT) && defined(CoreDebug) && defined(DWT_CTRL_CYCCNTENA_Msk) && defined(CoreDebug_DEMCR_TRCENA_Msk)
|
||||
// Enable tracing (required to access DWT on Cortex-M)
|
||||
CoreDebug->DEMCR |= CoreDebug_DEMCR_TRCENA_Msk;
|
||||
|
||||
#if defined(DWT_LAR)
|
||||
// DWT->LAR = 0xC5ACCE55; // unlock (if implemented)
|
||||
#endif
|
||||
|
||||
// Enable the cycle counter
|
||||
if ((DWT->CTRL & DWT_CTRL_CYCCNTENA_Msk) == 0) {
|
||||
DWT->CYCCNT = 0;
|
||||
DWT->CTRL |= DWT_CTRL_CYCCNTENA_Msk;
|
||||
__DSB(); __ISB();
|
||||
}
|
||||
|
||||
// Tick frequency is core clock
|
||||
#if defined(F_CPU)
|
||||
_halTicksPerSecond = (uint32_t)F_CPU;
|
||||
#elif defined(SystemCoreClock)
|
||||
_halTicksPerSecond = (uint32_t)SystemCoreClock;
|
||||
#else
|
||||
_halTicksPerSecond = 1000000UL; // last-resort fallback
|
||||
#endif
|
||||
#else
|
||||
// If DWT isn't available for some reason, fall back to micros().
|
||||
_halTicksPerSecond = 1000000UL;
|
||||
#endif
|
||||
|
||||
_halTicksPerMicro = _halTicksPerSecond / 1000000UL;
|
||||
if (_halTicksPerMicro == 0) _halTicksPerMicro = 1;
|
||||
}
|
||||
|
||||
static inline uint32_t HAL_TICKS_PER_SECOND() { return _halTicksPerSecond; }
|
||||
|
||||
static inline uint32_t IRAM_ATTR HAL_FAST_TICKS() {
|
||||
#if defined(DWT) && defined(CoreDebug) && defined(DWT_CTRL_CYCCNTENA_Msk) && defined(CoreDebug_DEMCR_TRCENA_Msk)
|
||||
return (uint32_t)DWT->CYCCNT; // 32-bit wraps naturally
|
||||
#else
|
||||
return (uint32_t)micros(); // fallback
|
||||
#endif
|
||||
}
|
||||
|
||||
#else
|
||||
|
||||
static inline void HAL_FAST_TICKS_INIT() {
|
||||
_halTicksPerSecond = 1000000UL;
|
||||
_halTicksPerMicro = 1;
|
||||
}
|
||||
|
||||
static inline uint32_t HAL_TICKS_PER_SECOND() { return _halTicksPerSecond; }
|
||||
|
||||
static inline uint32_t IRAM_ATTR HAL_FAST_TICKS() { return (uint32_t)micros(); }
|
||||
|
||||
#endif
|
||||
|
||||
// ----------------------------------------
|
||||
// Helpers (non-ISR intent)
|
||||
// ----------------------------------------
|
||||
|
||||
static inline uint32_t nanoseconds32() {
|
||||
// rolls over ~4.29s when returning uint32_t
|
||||
return (uint32_t)((uint64_t)HAL_FAST_TICKS() * 1000000000ULL / (uint64_t)HAL_TICKS_PER_SECOND());
|
||||
}
|
||||
|
||||
static inline uint32_t halNsToTicks(uint32_t ns) {
|
||||
// ticks = ns * (ticks/us) / 1000
|
||||
return (uint32_t)(((uint64_t)ns * (uint64_t)_halTicksPerMicro + 999ULL) / 1000ULL);
|
||||
}
|
||||
|
||||
#if !HAL_IS_TEENSY
|
||||
static inline void delayNanoseconds(uint32_t ns) {
|
||||
if (ns >= 20000UL) {
|
||||
delayMicroseconds((ns + 999UL) / 1000UL);
|
||||
return;
|
||||
}
|
||||
const uint32_t wait = halNsToTicks(ns);
|
||||
if (wait == 0) return;
|
||||
const uint32_t start = HAL_FAST_TICKS();
|
||||
while ((uint32_t)(HAL_FAST_TICKS() - start) < wait) { }
|
||||
}
|
||||
#endif
|
||||
Executable
+57
@@ -0,0 +1,57 @@
|
||||
// Platform setup ------------------------------------------------------------------------------------
|
||||
#pragma once
|
||||
|
||||
// We define a more generic symbol, in case more Teensy boards based on different lines are supported
|
||||
#define __M0__
|
||||
|
||||
#include <avr/dtostrf.h>
|
||||
|
||||
// Base rate for critical task timing
|
||||
#define HAL_FRACTIONAL_SEC 100.0F
|
||||
|
||||
// Analog read and write
|
||||
#ifndef HAL_VCC
|
||||
#define HAL_VCC 3.3F
|
||||
#endif
|
||||
#ifndef ANALOG_READ_RANGE
|
||||
#define ANALOG_READ_RANGE 1023 // always use 2^n - 1, within the platform's limits
|
||||
#else
|
||||
#error "Configuration (Config.h): ANALOG_READ_RANGE can't be changed on this platform"
|
||||
#endif
|
||||
#ifndef ANALOG_WRITE_RANGE
|
||||
#define ANALOG_WRITE_RANGE 255 // always use 2^n - 1, within the platform's limits
|
||||
#else
|
||||
#error "Configuration (Config.h): ANALOG_WRITE_RANGE can't be changed on this platform"
|
||||
#endif
|
||||
|
||||
// Lower limit (fastest) step rate in us for this platform (in SQW mode) and width of step pulse
|
||||
#define HAL_MAXRATE_LOWER_LIMIT 40
|
||||
#define HAL_PULSE_WIDTH 900 // in ns, estimated
|
||||
|
||||
// New symbol for the default I2C port ---------------------------------------------------------------
|
||||
#include <Wire.h>
|
||||
#ifndef HAL_WIRE
|
||||
#define HAL_WIRE Wire
|
||||
#endif
|
||||
#ifndef HAL_WIRE_CLOCK
|
||||
#define HAL_WIRE_CLOCK 100000
|
||||
#endif
|
||||
|
||||
// Non-volatile storage ------------------------------------------------------------------------------
|
||||
#if NV_DRIVER == NV_DEFAULT
|
||||
// Library FlashStorage defaults to 1024 bytes https://github.com/cmaglie/FlashStorage
|
||||
#define E2END 1023
|
||||
#undef NV_DRIVER
|
||||
#define NV_DRIVER NV_M0
|
||||
#endif
|
||||
|
||||
//--------------------------------------------------------------------------------------------------
|
||||
// Internal MCU temperature (in degrees C)
|
||||
#define HAL_TEMP() ( NAN )
|
||||
|
||||
//----------------------------------------------------------------------------------------------------
|
||||
// General purpose initialize for HAL
|
||||
|
||||
//-----------------------------------------------------------------------------------------------------
|
||||
// Misc. includes and defines to support this processor's operation
|
||||
|
||||
Executable
+68
@@ -0,0 +1,68 @@
|
||||
// Platform setup ------------------------------------------------------------------------------------
|
||||
#pragma once
|
||||
|
||||
// We define a more generic symbol, in case more Teensy boards based on different lines are supported
|
||||
// __AVR__
|
||||
|
||||
// 1/100 second resolution
|
||||
#define HAL_FRACTIONAL_SEC 100.0F
|
||||
|
||||
// This platform has 8 bit PWM
|
||||
#ifndef HAL_VCC
|
||||
#define HAL_VCC 5.0F
|
||||
#endif
|
||||
#ifndef ANALOG_READ_RANGE
|
||||
#define ANALOG_READ_RANGE 1023
|
||||
#else
|
||||
#error "Configuration (Config.h): ANALOG_READ_RANGE can't be changed on this platform"
|
||||
#endif
|
||||
#ifndef ANALOG_WRITE_RANGE
|
||||
#define ANALOG_WRITE_RANGE 255
|
||||
#else
|
||||
#error "Configuration (Config.h): ANALOG_WRITE_RANGE can't be changed on this platform"
|
||||
#endif
|
||||
|
||||
// This platform doesn't support true double precision math
|
||||
#define HAL_NO_DOUBLE_PRECISION
|
||||
|
||||
// This is for ~16MHz AVR processors or similar.
|
||||
#define HAL_SLOW_PROCESSOR
|
||||
|
||||
// Lower limit (fastest) step rate in us for this platform (in SQW mode) and width of step pulse
|
||||
#define HAL_MAXRATE_LOWER_LIMIT 76.8
|
||||
#define HAL_PULSE_WIDTH 10000 // in ns, estimated
|
||||
|
||||
// New symbol for the default I2C port -------------------------------------------------------------
|
||||
#include <Wire.h>
|
||||
#ifndef HAL_WIRE
|
||||
#define HAL_WIRE Wire
|
||||
#endif
|
||||
#ifndef HAL_WIRE_CLOCK
|
||||
#define HAL_WIRE_CLOCK 100000
|
||||
#endif
|
||||
|
||||
// Non-volatile storage ----------------------------------------------------------------------------
|
||||
#if NV_DRIVER == NV_DEFAULT
|
||||
#undef NV_DRIVER
|
||||
#define NV_DRIVER NV_EEPROM
|
||||
#endif
|
||||
|
||||
//--------------------------------------------------------------------------------------------------
|
||||
// General purpose initialize for HAL
|
||||
|
||||
#define HAL_INIT() { \
|
||||
analogReference(DEFAULT); \
|
||||
HAL_FAST_TICKS_INIT(); \
|
||||
}
|
||||
|
||||
#define HAL_RESET() mega2560restart();
|
||||
#define HAL_RESET_FUNC void (*mega2560restart) (void) = 0;
|
||||
|
||||
//--------------------------------------------------------------------------------------------------
|
||||
// Internal MCU temperature (in degrees C)
|
||||
#define HAL_TEMP() ( NAN )
|
||||
|
||||
//---------------------------------------------------------------------------------------------------
|
||||
// Misc. includes to support this processor's operation
|
||||
|
||||
#define strtof strtod // there is no strtof defined for the AVR platform
|
||||
Executable
+63
@@ -0,0 +1,63 @@
|
||||
// Platform setup ------------------------------------------------------------------------------------
|
||||
#pragma once
|
||||
|
||||
// We define a more generic symbol, in case more Teensy boards based on different lines are supported
|
||||
// __AVR__
|
||||
|
||||
// 1/100 second resolution
|
||||
#define HAL_FRACTIONAL_SEC 100.0F
|
||||
|
||||
// This platform has 8 bit PWM
|
||||
#ifndef HAL_VCC
|
||||
#define HAL_VCC 5.0F
|
||||
#endif
|
||||
#ifndef ANALOG_READ_RANGE
|
||||
#define ANALOG_READ_RANGE 1023 // always use 2^n - 1, within the platform's limits
|
||||
#else
|
||||
#error "Configuration (Config.h): ANALOG_READ_RANGE can't be changed on this platform"
|
||||
#endif
|
||||
#ifndef ANALOG_WRITE_RANGE
|
||||
#define ANALOG_WRITE_RANGE 255 // always use 2^n - 1, within the platform's limits
|
||||
#else
|
||||
#error "Configuration (Config.h): ANALOG_WRITE_RANGE can't be changed on this platform"
|
||||
#endif
|
||||
|
||||
// This platform doesn't support true double precision math
|
||||
#define HAL_NO_DOUBLE_PRECISION
|
||||
|
||||
// This is for ~16MHz AVR processors or similar.
|
||||
#define HAL_SLOW_PROCESSOR
|
||||
|
||||
// Lower limit (fastest) step rate in us for this platform (in SQW mode) and width of step pulse
|
||||
#define HAL_MAXRATE_LOWER_LIMIT 76.8
|
||||
#define HAL_PULSE_WIDTH 10000 // in ns, estimated
|
||||
|
||||
// New symbol for the default I2C port -------------------------------------------------------------
|
||||
#include <Wire.h>
|
||||
#ifndef HAL_WIRE
|
||||
#define HAL_WIRE Wire
|
||||
#endif
|
||||
#ifndef HAL_WIRE_CLOCK
|
||||
#define HAL_WIRE_CLOCK 100000
|
||||
#endif
|
||||
|
||||
// Non-volatile storage ----------------------------------------------------------------------------
|
||||
#if NV_DRIVER == NV_DEFAULT
|
||||
#undef NV_DRIVER
|
||||
#define NV_DRIVER NV_EEPROM
|
||||
#endif
|
||||
|
||||
//--------------------------------------------------------------------------------------------------
|
||||
// Internal MCU temperature (in degrees C)
|
||||
#define HAL_TEMP() ( NAN )
|
||||
|
||||
//--------------------------------------------------------------------------------------------------
|
||||
// General purpose initialize for HAL
|
||||
|
||||
#define HAL_INIT() { \
|
||||
analogReference(DEFAULT); \
|
||||
HAL_FAST_TICKS_INIT(); \
|
||||
}
|
||||
|
||||
//---------------------------------------------------------------------------------------------------
|
||||
// Misc. includes to support this processor's operation
|
||||
Executable
+55
@@ -0,0 +1,55 @@
|
||||
// Platform setup ------------------------------------------------------------------------------------
|
||||
#pragma once
|
||||
|
||||
// We define a more generic symbol, in case more Platform_Name boards based on different lines are supported
|
||||
|
||||
// Base rate for critical task timing
|
||||
#define HAL_FRACTIONAL_SEC 100.0F
|
||||
|
||||
// Analog read and write
|
||||
#ifndef HAL_VCC
|
||||
#define HAL_VCC 3.3F
|
||||
#endif
|
||||
#ifndef ANALOG_READ_RANGE
|
||||
#define ANALOG_READ_RANGE 1023
|
||||
#else
|
||||
#error "Configuration (Config.h): ANALOG_READ_RANGE can't be changed on this platform"
|
||||
#endif
|
||||
#ifndef ANALOG_WRITE_RANGE
|
||||
#define ANALOG_WRITE_RANGE 255
|
||||
#else
|
||||
#error "Configuration (Config.h): ANALOG_WRITE_RANGE can't be changed on this platform"
|
||||
#endif
|
||||
|
||||
// Lower limit (fastest) step rate in uS for this platform (in SQW mode) and width of step pulse
|
||||
#ifndef HAL_MAXRATE_LOWER_LIMIT
|
||||
#define HAL_MAXRATE_LOWER_LIMIT 60
|
||||
#endif
|
||||
#ifndef HAL_PULSE_WIDTH
|
||||
#define HAL_PULSE_WIDTH 10000 // in ns, estimated
|
||||
#endif
|
||||
|
||||
// New symbol for the default I2C port -------------------------------------------------------------
|
||||
#include <Wire.h>
|
||||
#ifndef HAL_WIRE
|
||||
#define HAL_WIRE Wire
|
||||
#endif
|
||||
#ifndef HAL_WIRE_CLOCK
|
||||
#define HAL_WIRE_CLOCK 100000
|
||||
#endif
|
||||
|
||||
// Non-volatile storage ----------------------------------------------------------------------------
|
||||
#if NV_DRIVER == NV_DEFAULT
|
||||
#undef NV_DRIVER
|
||||
#define NV_DRIVER NV_EEPROM
|
||||
#endif
|
||||
|
||||
//--------------------------------------------------------------------------------------------------
|
||||
// Internal MCU temperature (in degrees C)
|
||||
#define HAL_TEMP() ( NAN )
|
||||
|
||||
//--------------------------------------------------------------------------------------------------
|
||||
// General purpose initialize for HAL
|
||||
|
||||
//---------------------------------------------------------------------------------------------------
|
||||
// Misc. includes to support this processor's operation
|
||||
Executable
+96
@@ -0,0 +1,96 @@
|
||||
// Platform setup ------------------------------------------------------------------------------------
|
||||
#pragma once
|
||||
|
||||
// This is for fast processors with hardware FP
|
||||
#define HAL_FAST_PROCESSOR
|
||||
|
||||
// Base rate for critical task timing (0.0095s = 0.14", 0.2 sec/day)
|
||||
#define HAL_FRACTIONAL_SEC 105.2631579F
|
||||
|
||||
// Analog read and write
|
||||
#ifndef HAL_VCC
|
||||
#define HAL_VCC 3.3F
|
||||
#endif
|
||||
#ifndef ANALOG_READ_RANGE
|
||||
#define ANALOG_READ_RANGE 1023 // always use 2^n - 1, within the platform's limits
|
||||
#endif
|
||||
#ifndef ANALOG_WRITE_RANGE
|
||||
#define ANALOG_WRITE_RANGE 255 // always use 2^n - 1, within the platform's limits
|
||||
#endif
|
||||
|
||||
// analog read/write capabilities
|
||||
#define HAL_HAS_PER_PIN_PWM_RESOLUTION 0
|
||||
#define HAL_HAS_PER_PIN_PWM_FREQUENCY 0
|
||||
#define HAL_HAS_GLOBAL_PWM_RESOLUTION 1
|
||||
#define HAL_HAS_GLOBAL_PWM_FREQUENCY 1
|
||||
#define HAL_PWM_HZ_MAX 200000U
|
||||
|
||||
#define HAL_HAS_GLOBAL_ADC_RESOLUTION 1
|
||||
|
||||
#define HAL_PWM_BITS_MAX 16
|
||||
#define HAL_ADC_BITS_MAX 12
|
||||
|
||||
// Lower limit (fastest) step rate in us for this platform (in SQW mode) and width of step pulse
|
||||
#if CAN_PLUS != OFF
|
||||
#define HAL_MAXRATE_LOWER_LIMIT 60
|
||||
#else
|
||||
#define HAL_MAXRATE_LOWER_LIMIT 40
|
||||
#endif
|
||||
#define HAL_PULSE_WIDTH 300 // in ns, measured 12/5/25 (ESP32 v2.0.17)
|
||||
|
||||
// New symbol for the default I2C port -------------------------------------------------------------
|
||||
#include <Wire.h>
|
||||
#ifndef HAL_WIRE
|
||||
#define HAL_WIRE Wire
|
||||
#endif
|
||||
#ifndef HAL_WIRE_CLOCK
|
||||
#define HAL_WIRE_CLOCK 100000
|
||||
#endif
|
||||
|
||||
// Non-volatile storage ----------------------------------------------------------------------------
|
||||
#if NV_DRIVER == NV_DEFAULT
|
||||
#undef NV_DRIVER
|
||||
#define NV_DRIVER NV_ESP
|
||||
#endif
|
||||
|
||||
//--------------------------------------------------------------------------------------------------
|
||||
// Internal MCU temperature (in degrees C)
|
||||
// Correction for ESP32's internal temperture sensor
|
||||
#ifndef INTERNAL_TEMP_CORRECTION
|
||||
#define INTERNAL_TEMP_CORRECTION 0
|
||||
#endif
|
||||
#define HAL_TEMP() ( temperatureRead() + INTERNAL_TEMP_CORRECTION )
|
||||
|
||||
//--------------------------------------------------------------------------------------------------
|
||||
// General purpose initialize for HAL, optionally also early init of SERIAL_SIP/PIP or SERIAL_BT
|
||||
#ifndef SERIAL_BT_MODE
|
||||
#define SERIAL_BT_MODE OFF
|
||||
#endif
|
||||
#if SERIAL_BT_MODE != OFF
|
||||
#include <BluetoothSerial.h>
|
||||
extern BluetoothSerial bluetoothSerial;
|
||||
#define SERIAL_BT bluetoothSerial
|
||||
#endif
|
||||
#if SERIAL_BT_MODE == SLAVE
|
||||
#ifdef SERIAL_BT_PASSKEY
|
||||
#define SERIAL_BT_BEGIN() if (strlen(SERIAL_BT_PASSKEY) != 0) SERIAL_BT.setPin(SERIAL_BT_PASSKEY); SERIAL_BT.begin(SERIAL_BT_NAME)
|
||||
#else
|
||||
#define SERIAL_BT_BEGIN() SERIAL_BT.begin(SERIAL_BT_NAME)
|
||||
#endif
|
||||
#else
|
||||
#define SERIAL_BT_BEGIN()
|
||||
#endif
|
||||
|
||||
//--------------------------------------------------------------------------------------------------
|
||||
// General purpose initialize for HAL
|
||||
|
||||
#define HAL_INIT() { \
|
||||
SERIAL_BT_BEGIN(); \
|
||||
HAL_FAST_TICKS_INIT(); \
|
||||
}
|
||||
|
||||
// MCU reset
|
||||
#define HAL_RESET() ESP.restart()
|
||||
|
||||
//---------------------------------------------------------------------------------------------------
|
||||
// Misc. includes to support this processor's operation
|
||||
Executable
+98
@@ -0,0 +1,98 @@
|
||||
// Platform setup ------------------------------------------------------------------------------------
|
||||
#pragma once
|
||||
|
||||
// This is for fast processors with hardware FP
|
||||
#define HAL_FAST_PROCESSOR
|
||||
|
||||
// Base rate for critical task timing (0.0095s = 0.14", 0.2 sec/day)
|
||||
#define HAL_FRACTIONAL_SEC 105.2631579F
|
||||
|
||||
// Analog read and write
|
||||
#ifndef HAL_VCC
|
||||
#define HAL_VCC 3.3F
|
||||
#endif
|
||||
#ifndef ANALOG_READ_RANGE
|
||||
#define ANALOG_READ_RANGE 1023
|
||||
#endif
|
||||
#ifndef ANALOG_WRITE_RANGE
|
||||
#define ANALOG_WRITE_RANGE 255
|
||||
#else
|
||||
#error "Configuration (Config.h): ANALOG_WRITE_RANGE can't be changed on this platform"
|
||||
#endif
|
||||
|
||||
// analog read/write capabilities
|
||||
#define HAL_HAS_PER_PIN_PWM_RESOLUTION 0
|
||||
#define HAL_HAS_PER_PIN_PWM_FREQUENCY 0
|
||||
#define HAL_HAS_GLOBAL_PWM_RESOLUTION 1
|
||||
#define HAL_HAS_GLOBAL_PWM_FREQUENCY 1
|
||||
#define HAL_PWM_HZ_MAX 200000U
|
||||
|
||||
#define HAL_HAS_GLOBAL_ADC_RESOLUTION 1
|
||||
|
||||
#define HAL_PWM_BITS_MAX 16
|
||||
#define HAL_ADC_BITS_MAX 12
|
||||
|
||||
// Lower limit (fastest) step rate in us for this platform (in SQW mode) and width of step pulse
|
||||
#if CAN_PLUS != OFF
|
||||
#define HAL_MAXRATE_LOWER_LIMIT 60
|
||||
#else
|
||||
#define HAL_MAXRATE_LOWER_LIMIT 40
|
||||
#endif
|
||||
#define HAL_PULSE_WIDTH 200 // in ns, measured 1/18/22 (ESP32 v2.0.0)
|
||||
|
||||
// New symbol for the default I2C port -------------------------------------------------------------
|
||||
#include <Wire.h>
|
||||
#ifndef HAL_WIRE
|
||||
#define HAL_WIRE Wire
|
||||
#endif
|
||||
#ifndef HAL_WIRE_CLOCK
|
||||
#define HAL_WIRE_CLOCK 100000
|
||||
#endif
|
||||
|
||||
// Non-volatile storage ----------------------------------------------------------------------------
|
||||
#if NV_DRIVER == NV_DEFAULT
|
||||
#undef NV_DRIVER
|
||||
#define NV_DRIVER NV_ESP
|
||||
#endif
|
||||
|
||||
//--------------------------------------------------------------------------------------------------
|
||||
// Internal MCU temperature (in degrees C)
|
||||
// Correction for ESP32's internal temperture sensor
|
||||
#ifndef INTERNAL_TEMP_CORRECTION
|
||||
#define INTERNAL_TEMP_CORRECTION 0
|
||||
#endif
|
||||
#define HAL_TEMP() ( temperatureRead() + INTERNAL_TEMP_CORRECTION )
|
||||
|
||||
//--------------------------------------------------------------------------------------------------
|
||||
// General purpose initialize for HAL, optionally also early init of SERIAL_SIP/PIP or SERIAL_BT
|
||||
#ifndef SERIAL_BT_MODE
|
||||
#define SERIAL_BT_MODE OFF
|
||||
#endif
|
||||
#if SERIAL_BT_MODE != OFF
|
||||
#include <BluetoothSerial.h>
|
||||
extern BluetoothSerial bluetoothSerial;
|
||||
#define SERIAL_BT bluetoothSerial
|
||||
#endif
|
||||
#if SERIAL_BT_MODE == SLAVE
|
||||
#ifdef SERIAL_BT_PASSKEY
|
||||
#define SERIAL_BT_BEGIN() if (strlen(SERIAL_BT_PASSKEY) != 0) SERIAL_BT.setPin(SERIAL_BT_PASSKEY, strlen(SERIAL_BT_PASSKEY)); SERIAL_BT.begin(SERIAL_BT_NAME)
|
||||
#else
|
||||
#define SERIAL_BT_BEGIN() SERIAL_BT.begin(SERIAL_BT_NAME)
|
||||
#endif
|
||||
#else
|
||||
#define SERIAL_BT_BEGIN()
|
||||
#endif
|
||||
|
||||
//--------------------------------------------------------------------------------------------------
|
||||
// General purpose initialize for HAL
|
||||
|
||||
#define HAL_INIT() { \
|
||||
SERIAL_BT_BEGIN(); \
|
||||
HAL_FAST_TICKS_INIT(); \
|
||||
}
|
||||
|
||||
// MCU reset
|
||||
#define HAL_RESET() ESP.restart()
|
||||
|
||||
//---------------------------------------------------------------------------------------------------
|
||||
// Misc. includes to support this processor's operation
|
||||
Executable
+56
@@ -0,0 +1,56 @@
|
||||
// Platform setup ------------------------------------------------------------------------------------
|
||||
#pragma once
|
||||
|
||||
// This is for fast processors with hardware FP
|
||||
#define HAL_FAST_PROCESSOR
|
||||
|
||||
// Base rate for critical task timing (0.0095s = 0.14", 0.2 sec/day)
|
||||
#define HAL_FRACTIONAL_SEC 105.2631579F
|
||||
|
||||
// Analog read and write
|
||||
#ifndef HAL_VCC
|
||||
#define HAL_VCC 3.3F
|
||||
#endif
|
||||
#ifndef ANALOG_READ_RANGE
|
||||
#define ANALOG_READ_RANGE 1023
|
||||
#endif
|
||||
#ifndef ANALOG_WRITE_RANGE
|
||||
#define ANALOG_WRITE_RANGE 255
|
||||
#endif
|
||||
|
||||
// Lower limit (fastest) step rate in us for this platform (in SQW mode) and width of step pulse
|
||||
#define HAL_MAXRATE_LOWER_LIMIT 60
|
||||
#define HAL_PULSE_WIDTH 10000 // in ns, estimated
|
||||
|
||||
// New symbol for the default I2C port -------------------------------------------------------------
|
||||
#include <Wire.h>
|
||||
#ifndef HAL_WIRE
|
||||
#define HAL_WIRE Wire
|
||||
#endif
|
||||
#ifndef HAL_WIRE_CLOCK
|
||||
#define HAL_WIRE_CLOCK 100000
|
||||
#endif
|
||||
|
||||
// Non-volatile storage ----------------------------------------------------------------------------
|
||||
#if NV_DRIVER == NV_DEFAULT
|
||||
#define E2END 2047
|
||||
#undef NV_DRIVER
|
||||
#define NV_DRIVER NV_EEPROM
|
||||
#endif
|
||||
|
||||
//--------------------------------------------------------------------------------------------------
|
||||
// Internal MCU temperature (in degrees C)
|
||||
#define HAL_TEMP() ( NAN )
|
||||
|
||||
//--------------------------------------------------------------------------------------------------
|
||||
// General purpose initialize for HAL
|
||||
|
||||
#define HAL_INIT() { \
|
||||
HAL_FAST_TICKS_INIT(); \
|
||||
}
|
||||
|
||||
// MCU reset
|
||||
#define HAL_RESET() ESP.restart()
|
||||
|
||||
//---------------------------------------------------------------------------------------------------
|
||||
// Misc. includes to support this processor's operation
|
||||
Executable
+51
@@ -0,0 +1,51 @@
|
||||
// Platform setup ------------------------------------------------------------------------------------
|
||||
#pragma once
|
||||
|
||||
// We define a more generic symbol, in case more Platform_Name boards based on different lines are supported
|
||||
|
||||
// Base rate for critical task timing
|
||||
#define HAL_FRACTIONAL_SEC 100.0F
|
||||
|
||||
// Analog read and write
|
||||
#ifndef HAL_VCC
|
||||
#define HAL_VCC 3.3F
|
||||
#endif
|
||||
#ifndef ANALOG_READ_RANGE
|
||||
#define ANALOG_READ_RANGE 1023
|
||||
#endif
|
||||
#ifndef ANALOG_WRITE_RANGE
|
||||
#define ANALOG_WRITE_RANGE 255
|
||||
#endif
|
||||
|
||||
// Lower limit (fastest) step rate in us for this platform (in SQW mode) and width of step pulse
|
||||
#define HAL_MAXRATE_LOWER_LIMIT 60
|
||||
#define HAL_PULSE_WIDTH 10000 // in ns, estimated
|
||||
|
||||
// New symbol for the default I2C port ---------------------------------------------------------------
|
||||
#include <Wire.h>
|
||||
#ifndef HAL_WIRE
|
||||
#define HAL_WIRE Wire
|
||||
#endif
|
||||
#ifndef HAL_WIRE_CLOCK
|
||||
#define HAL_WIRE_CLOCK 100000
|
||||
#endif
|
||||
|
||||
// Non-volatile storage ------------------------------------------------------------------------------
|
||||
#if NV_DRIVER == NV_DEFAULT
|
||||
#define E2END 1023
|
||||
#undef NV_DRIVER
|
||||
#define NV_DRIVER NV_ESP
|
||||
#endif
|
||||
|
||||
//--------------------------------------------------------------------------------------------------
|
||||
// Internal MCU temperature (in degrees C)
|
||||
#define HAL_TEMP() ( NAN )
|
||||
|
||||
//--------------------------------------------------------------------------------------------------
|
||||
// General purpose initialize for HAL
|
||||
|
||||
//-----------------------------------------------------------------------------------------------------
|
||||
// Misc. includes and defines to support this processor's operation
|
||||
|
||||
// MCU reset
|
||||
#define HAL_RESET() ESP.restart()
|
||||
Executable
+52
@@ -0,0 +1,52 @@
|
||||
// Platform setup ------------------------------------------------------------------------------------
|
||||
#pragma once
|
||||
|
||||
// 1/100 second resolution
|
||||
#define HAL_FRACTIONAL_SEC 100.0F
|
||||
|
||||
// This platform has 8 bit PWM
|
||||
#ifndef HAL_VCC
|
||||
#define HAL_VCC 3.3F
|
||||
#endif
|
||||
#ifndef ANALOG_READ_RANGE
|
||||
#define ANALOG_READ_RANGE 1023 // always use 2^n - 1, within the platform's limits
|
||||
#else
|
||||
#error "Configuration (Config.h): ANALOG_READ_RANGE can't be changed on this platform"
|
||||
#endif
|
||||
#ifndef ANALOG_WRITE_RANGE
|
||||
#define ANALOG_WRITE_RANGE 255 // always use 2^n - 1, within the platform's limits
|
||||
#else
|
||||
#error "Configuration (Config.h): ANALOG_WRITE_RANGE can't be changed on this platform"
|
||||
#endif
|
||||
|
||||
// Lower limit (fastest) step rate in us for this platform (in SQW mode) and width of step pulse
|
||||
#define HAL_MAXRATE_LOWER_LIMIT 76.8
|
||||
#define HAL_PULSE_WIDTH 10000 // in ns, estimated
|
||||
|
||||
// New symbol for the default I2C port -------------------------------------------------------------
|
||||
#include <Wire.h>
|
||||
#ifndef HAL_WIRE
|
||||
#define HAL_WIRE Wire
|
||||
#endif
|
||||
#ifndef HAL_WIRE_CLOCK
|
||||
#define HAL_WIRE_CLOCK 100000
|
||||
#endif
|
||||
|
||||
// Non-volatile storage ----------------------------------------------------------------------------
|
||||
#if NV_DRIVER == NV_DEFAULT
|
||||
#undef NV_DRIVER
|
||||
#define NV_DRIVER NV_AT24C32
|
||||
#endif
|
||||
|
||||
//--------------------------------------------------------------------------------------------------
|
||||
// Internal MCU temperature (in degrees C)
|
||||
#define HAL_TEMP() ( NAN )
|
||||
|
||||
//--------------------------------------------------------------------------------------------------
|
||||
// General purpose initialize for HAL
|
||||
|
||||
// MCU reset
|
||||
#define HAL_RESET() (*((volatile uint32_t*)(PPB_BASE + 0x0ED0C))) = 0x5FA0004;
|
||||
|
||||
//---------------------------------------------------------------------------------------------------
|
||||
// Misc. includes to support this processor's operation
|
||||
Executable
+52
@@ -0,0 +1,52 @@
|
||||
// Platform setup ------------------------------------------------------------------------------------
|
||||
#pragma once
|
||||
|
||||
// 1/100 second resolution
|
||||
#define HAL_FRACTIONAL_SEC 100.0F
|
||||
|
||||
// This platform has 8 bit PWM
|
||||
#ifndef HAL_VCC
|
||||
#define HAL_VCC 3.3F
|
||||
#endif
|
||||
#ifndef ANALOG_READ_RANGE
|
||||
#define ANALOG_READ_RANGE 1023 // always use 2^n - 1, within the platform's limits
|
||||
#else
|
||||
#error "Configuration (Config.h): ANALOG_READ_RANGE can't be changed on this platform"
|
||||
#endif
|
||||
#ifndef ANALOG_WRITE_RANGE
|
||||
#define ANALOG_WRITE_RANGE 255 // always use 2^n - 1, within the platform's limits
|
||||
#else
|
||||
#error "Configuration (Config.h): ANALOG_WRITE_RANGE can't be changed on this platform"
|
||||
#endif
|
||||
|
||||
// Lower limit (fastest) step rate in us for this platform (in SQW mode) and width of step pulse
|
||||
#define HAL_MAXRATE_LOWER_LIMIT 76.8
|
||||
#define HAL_PULSE_WIDTH 10000 // in ns, estimated
|
||||
|
||||
// New symbol for the default I2C port -------------------------------------------------------------
|
||||
#include <Wire.h>
|
||||
#ifndef HAL_WIRE
|
||||
#define HAL_WIRE Wire
|
||||
#endif
|
||||
#ifndef HAL_WIRE_CLOCK
|
||||
#define HAL_WIRE_CLOCK 100000
|
||||
#endif
|
||||
|
||||
// Non-volatile storage ----------------------------------------------------------------------------
|
||||
#if NV_DRIVER == NV_DEFAULT
|
||||
#undef NV_DRIVER
|
||||
#define NV_DRIVER NV_AT24C32
|
||||
#endif
|
||||
|
||||
//--------------------------------------------------------------------------------------------------
|
||||
// Internal MCU temperature (in degrees C)
|
||||
#define HAL_TEMP() ( NAN )
|
||||
|
||||
//--------------------------------------------------------------------------------------------------
|
||||
// General purpose initialize for HAL
|
||||
|
||||
// MCU reset
|
||||
#define HAL_RESET() (*((volatile uint32_t*)(PPB_BASE + 0x0ED0C))) = 0x5FA0004;
|
||||
|
||||
//---------------------------------------------------------------------------------------------------
|
||||
// Misc. includes to support this processor's operation
|
||||
Executable
+65
@@ -0,0 +1,65 @@
|
||||
// Platform setup ------------------------------------------------------------------------------------
|
||||
#pragma once
|
||||
|
||||
// We define a more generic symbol, in case more STM32 boards based on different lines are supported
|
||||
#define __ARM_STM32__
|
||||
|
||||
// Base rate for critical task timing (0.0095s = 0.14", 0.2 sec/day)
|
||||
#define HAL_FRACTIONAL_SEC 105.2631579F
|
||||
|
||||
// Analog read and write
|
||||
#ifndef HAL_VCC
|
||||
#define HAL_VCC 3.3F
|
||||
#endif
|
||||
#ifndef ANALOG_READ_RANGE
|
||||
#define ANALOG_READ_RANGE 1023
|
||||
#else
|
||||
#error "Configuration (Config.h): ANALOG_READ_RANGE can't be changed on this platform"
|
||||
#endif
|
||||
#ifndef ANALOG_WRITE_RANGE
|
||||
#define ANALOG_WRITE_RANGE 255
|
||||
#endif
|
||||
|
||||
// Lower limit (fastest) step rate in uS for this platform (in SQW mode) and width of step pulse
|
||||
#define HAL_MAXRATE_LOWER_LIMIT 34 // assumes optimization set to Fastest (-O3)
|
||||
#define HAL_PULSE_WIDTH 900 // in ns, estimated
|
||||
|
||||
#include <HardwareTimer.h>
|
||||
|
||||
// Interrupts
|
||||
#define cli() noInterrupts()
|
||||
#define sei() interrupts()
|
||||
|
||||
// New symbol for the default I2C port ---------------------------------------------------------------
|
||||
#include <Wire.h>
|
||||
#ifndef HAL_WIRE
|
||||
#define HAL_WIRE Wire
|
||||
#endif
|
||||
#ifndef HAL_WIRE_CLOCK
|
||||
#define HAL_WIRE_CLOCK 100000
|
||||
#endif
|
||||
|
||||
// Non-volatile storage ------------------------------------------------------------------------------
|
||||
#undef E2END
|
||||
#if NV_DRIVER == NV_DEFAULT
|
||||
#undef NV_DRIVER
|
||||
#define NV_DRIVER NV_AT24C32
|
||||
#endif
|
||||
|
||||
//--------------------------------------------------------------------------------------------------
|
||||
// Internal MCU temperature (in degrees C)
|
||||
#define HAL_TEMP() ( NAN )
|
||||
|
||||
//--------------------------------------------------------------------------------------------------
|
||||
// General purpose initialize for HAL
|
||||
#define HAL_INIT() { \
|
||||
}
|
||||
|
||||
//---------------------------------------------------------------------------------------------------
|
||||
// Misc. includes to support this processor's operation
|
||||
|
||||
// always bring in the software serial library early as strange things happen otherwise
|
||||
#include <SoftwareSerial.h>
|
||||
|
||||
// MCU reset
|
||||
#define HAL_RESET() NVIC_SystemReset()
|
||||
Executable
+67
@@ -0,0 +1,67 @@
|
||||
// Platform setup ------------------------------------------------------------------------------------
|
||||
#pragma once
|
||||
|
||||
// We define a more generic symbol, in case more STM32 boards based on different lines are supported
|
||||
#define __ARM_STM32__
|
||||
|
||||
#define HAL_FAST_PROCESSOR
|
||||
|
||||
// Base rate for critical task timing (0.0057s = 0.09", 0.2 sec/day)
|
||||
#define HAL_FRACTIONAL_SEC 175.4385965F
|
||||
|
||||
// Analog read and write
|
||||
#ifndef HAL_VCC
|
||||
#define HAL_VCC 3.3F
|
||||
#endif
|
||||
#ifndef ANALOG_READ_RANGE
|
||||
#define ANALOG_READ_RANGE 1023
|
||||
#else
|
||||
#error "Configuration (Config.h): ANALOG_READ_RANGE can't be changed on this platform"
|
||||
#endif
|
||||
#ifndef ANALOG_WRITE_RANGE
|
||||
#define ANALOG_WRITE_RANGE 255
|
||||
#endif
|
||||
|
||||
// Lower limit (fastest) step rate in uS for this platform (in SQW mode) and width of step pulse
|
||||
#define HAL_MAXRATE_LOWER_LIMIT 20 // assumes optimization set to Fastest (-O3)
|
||||
#define HAL_PULSE_WIDTH 450 // in ns, estimated
|
||||
|
||||
#include <HardwareTimer.h>
|
||||
|
||||
// Interrupts
|
||||
#define cli() noInterrupts()
|
||||
#define sei() interrupts()
|
||||
|
||||
// New symbol for the default I2C port ---------------------------------------------------------------
|
||||
#include <Wire.h>
|
||||
#ifndef HAL_WIRE
|
||||
#define HAL_WIRE Wire
|
||||
#endif
|
||||
#ifndef HAL_WIRE_CLOCK
|
||||
#define HAL_WIRE_CLOCK 100000
|
||||
#endif
|
||||
|
||||
// Non-volatile storage ------------------------------------------------------------------------------
|
||||
#undef E2END
|
||||
#if NV_DRIVER == NV_DEFAULT
|
||||
#undef NV_DRIVER
|
||||
#define NV_DRIVER NV_AT24C32
|
||||
#endif
|
||||
|
||||
//--------------------------------------------------------------------------------------------------
|
||||
// Internal MCU temperature (in degrees C)
|
||||
#define HAL_TEMP() ( NAN )
|
||||
|
||||
//--------------------------------------------------------------------------------------------------
|
||||
// General purpose initialize for HAL
|
||||
#define HAL_INIT() { \
|
||||
}
|
||||
|
||||
//---------------------------------------------------------------------------------------------------
|
||||
// Misc. includes to support this processor's operation
|
||||
|
||||
// always bring in the software serial library early as strange things happen otherwise
|
||||
#include <SoftwareSerial.h>
|
||||
|
||||
// MCU reset
|
||||
#define HAL_RESET() NVIC_SystemReset()
|
||||
Executable
+75
@@ -0,0 +1,75 @@
|
||||
// Platform setup ------------------------------------------------------------------------------------
|
||||
#pragma once
|
||||
|
||||
// We define a more generic symbol, in case more STM32 boards based on different lines are supported
|
||||
#define __ARM_STM32__
|
||||
|
||||
// Base rate for critical task timing (0.0038s = 0.06", 0.2 sec/day)
|
||||
#define HAL_FRACTIONAL_SEC 263.1578947F
|
||||
|
||||
// Analog read and write
|
||||
#ifndef HAL_VCC
|
||||
#define HAL_VCC 3.3F
|
||||
#endif
|
||||
#ifndef ANALOG_READ_RANGE
|
||||
#define ANALOG_READ_RANGE 1023
|
||||
#else
|
||||
#error "Configuration (Config.h): ANALOG_READ_RANGE can't be changed on this platform"
|
||||
#endif
|
||||
#ifndef ANALOG_WRITE_RANGE
|
||||
#define ANALOG_WRITE_RANGE 255
|
||||
#endif
|
||||
|
||||
// STM32 Arduino cores (F4 + H7):
|
||||
// assume global resolution functions exist; per-pin freq/res is not generic.
|
||||
#define HAL_HAS_GLOBAL_PWM_RESOLUTION 1
|
||||
#define HAL_HAS_GLOBAL_ADC_RESOLUTION 1
|
||||
|
||||
#define HAL_PWM_BITS_MAX 16
|
||||
|
||||
// F4 ADC is 12-bit; H7 can be higher, but core support varies.
|
||||
// Default to 12 and let advanced HAL override to 16 for known-good H7 setup.
|
||||
#define HAL_ADC_BITS_MAX 12
|
||||
|
||||
// Lower limit (fastest) step rate in uS for this platform (in SQW mode) and width of step pulse
|
||||
#define HAL_FAST_PROCESSOR
|
||||
#define HAL_MAXRATE_LOWER_LIMIT 14 // assumes optimization set to Fastest (-O3)
|
||||
#define HAL_PULSE_WIDTH 250 // in ns, estimated
|
||||
|
||||
#include <HardwareTimer.h>
|
||||
|
||||
// Interrupts
|
||||
#define cli() noInterrupts()
|
||||
#define sei() interrupts()
|
||||
|
||||
// New symbol for the default I2C port ---------------------------------------------------------------
|
||||
#include <Wire.h>
|
||||
#ifndef HAL_WIRE
|
||||
#define HAL_WIRE Wire
|
||||
#endif
|
||||
// no HAL_WIRE_CLOCK, it breaks the STM32 library
|
||||
|
||||
// Non-volatile storage ------------------------------------------------------------------------------
|
||||
#if NV_DRIVER == NV_DEFAULT
|
||||
#undef NV_DRIVER
|
||||
#define NV_DRIVER NV_AT24C32
|
||||
#endif
|
||||
|
||||
//--------------------------------------------------------------------------------------------------
|
||||
// Internal MCU temperature (in degrees C)
|
||||
#define HAL_TEMP() ( NAN )
|
||||
|
||||
//--------------------------------------------------------------------------------------------------
|
||||
// General purpose initialize for HAL
|
||||
#define HAL_INIT() { \
|
||||
HAL_WIRE.setSDA(PB7); \
|
||||
HAL_WIRE.setSCL(PB6); \
|
||||
}
|
||||
//---------------------------------------------------------------------------------------------------
|
||||
// Misc. includes to support this processor's operation
|
||||
|
||||
// always bring in the software serial library early as strange things happen otherwise
|
||||
#include <SoftwareSerial.h>
|
||||
|
||||
// MCU reset
|
||||
#define HAL_RESET() NVIC_SystemReset()
|
||||
Executable
+86
@@ -0,0 +1,86 @@
|
||||
// Platform setup ------------------------------------------------------------------------------------
|
||||
#pragma once
|
||||
|
||||
// We define a more generic symbol, in case more STM32 boards based on different lines are supported
|
||||
#define __ARM_STM32__
|
||||
|
||||
// Base rate for critical task timing (0.0038s = 0.06", 0.2 sec/day)
|
||||
#define HAL_FRACTIONAL_SEC 263.1578947F
|
||||
|
||||
// Analog read and write
|
||||
#ifndef HAL_VCC
|
||||
#define HAL_VCC 3.3F
|
||||
#endif
|
||||
#ifndef ANALOG_READ_RANGE
|
||||
#define ANALOG_READ_RANGE 1023
|
||||
#else
|
||||
#error "Configuration (Config.h): ANALOG_READ_RANGE can't be changed on this platform"
|
||||
#endif
|
||||
#ifndef ANALOG_WRITE_RANGE
|
||||
#define ANALOG_WRITE_RANGE 255
|
||||
#endif
|
||||
|
||||
// STM32 Arduino cores (F4 + H7):
|
||||
// assume global resolution functions exist; per-pin freq/res is not generic.
|
||||
#define HAL_HAS_GLOBAL_PWM_RESOLUTION 1
|
||||
#define HAL_HAS_GLOBAL_ADC_RESOLUTION 1
|
||||
|
||||
#define HAL_PWM_BITS_MAX 16
|
||||
|
||||
// F4 ADC is 12-bit; H7 can be higher, but core support varies.
|
||||
// Default to 12 and let advanced HAL override to 16 for known-good H7 setup.
|
||||
#define HAL_ADC_BITS_MAX 12
|
||||
|
||||
// Lower limit (fastest) step rate in uS for this platform (in SQW mode) and width of step pulse
|
||||
#define HAL_FAST_PROCESSOR
|
||||
#define HAL_MAXRATE_LOWER_LIMIT 14 // assumes optimization set to Fastest (-O3)
|
||||
#define HAL_PULSE_WIDTH 250 // in ns, estimated
|
||||
|
||||
#include <HardwareTimer.h>
|
||||
|
||||
// Interrupts
|
||||
#define cli() noInterrupts()
|
||||
#define sei() interrupts()
|
||||
|
||||
// New symbol for the default I2C port ---------------------------------------------------------------
|
||||
#include <Wire.h>
|
||||
#ifndef HAL_WIRE
|
||||
#define HAL_WIRE Wire
|
||||
#endif
|
||||
#ifndef HAL_WIRE_CLOCK
|
||||
#define HAL_WIRE_CLOCK 100000
|
||||
#endif
|
||||
|
||||
// Non-volatile storage ------------------------------------------------------------------------------
|
||||
#undef E2END
|
||||
#if NV_DRIVER == NV_DEFAULT
|
||||
#undef NV_DRIVER
|
||||
#if PINMAP == FYSETC_S6_2
|
||||
// The FYSETC S6 v2 has a 4096 byte EEPROM built-in
|
||||
#define NV_DRIVER NV_2432
|
||||
#elif PINMAP == FYSETC_S6
|
||||
// The FYSETC S6 has a 2048 byte EEPROM built-in
|
||||
#define NV_DRIVER NV_2416
|
||||
#else
|
||||
// Fallback to the EEPROM present on an ZS-042 module
|
||||
#define NV_DRIVER NV_AT24C32
|
||||
#endif
|
||||
#endif
|
||||
|
||||
//--------------------------------------------------------------------------------------------------
|
||||
// Internal MCU temperature (in degrees C)
|
||||
#define HAL_TEMP() ( NAN )
|
||||
|
||||
//--------------------------------------------------------------------------------------------------
|
||||
// General purpose initialize for HAL
|
||||
#define HAL_INIT() { \
|
||||
}
|
||||
|
||||
//---------------------------------------------------------------------------------------------------
|
||||
// Misc. includes to support this processor's operation
|
||||
|
||||
// always bring in the software serial library early as strange things happen otherwise
|
||||
#include <SoftwareSerial.h>
|
||||
|
||||
// MCU reset
|
||||
#define HAL_RESET() NVIC_SystemReset()
|
||||
Executable
+81
@@ -0,0 +1,81 @@
|
||||
// Platform setup ------------------------------------------------------------------------------------
|
||||
#pragma once
|
||||
|
||||
// We define a more generic symbol, in case more STM32 boards based on different lines are supported
|
||||
#define __ARM_STM32__
|
||||
|
||||
#define HAL_FAST_PROCESSOR
|
||||
|
||||
// Base rate for critical task timing (0.0057s = 0.09", 0.2 sec/day)
|
||||
#define HAL_FRACTIONAL_SEC 175.4385965F
|
||||
|
||||
// Analog read and write
|
||||
#ifndef HAL_VCC
|
||||
#define HAL_VCC 3.3F
|
||||
#endif
|
||||
#ifndef ANALOG_READ_RANGE
|
||||
#define ANALOG_READ_RANGE 1023
|
||||
#else
|
||||
#error "Configuration (Config.h): ANALOG_READ_RANGE can't be changed on this platform"
|
||||
#endif
|
||||
#ifndef ANALOG_WRITE_RANGE
|
||||
#define ANALOG_WRITE_RANGE 255
|
||||
#endif
|
||||
|
||||
// Lower limit (fastest) step rate in uS for this platform (in SQW mode) and width of step pulse
|
||||
#ifdef STM32F401xC
|
||||
#define HAL_MAXRATE_LOWER_LIMIT 20 // assumes optimization set to Fastest (-O3)
|
||||
#define HAL_PULSE_WIDTH 300 // in ns, estimated
|
||||
#elif STM32F411xE
|
||||
#define HAL_MAXRATE_LOWER_LIMIT 20 // Lower limit (fastest) step rate in us (in SQW mode) assumes optimization set to Fastest (-O3)
|
||||
#define HAL_PULSE_WIDTH 300 // in ns, estimated
|
||||
#else
|
||||
#define HAL_MAXRATE_LOWER_LIMIT 60
|
||||
#define HAL_PULSE_WIDTH 900 // in ns, estimated
|
||||
#endif
|
||||
|
||||
#include <HardwareTimer.h>
|
||||
|
||||
// Interrupts
|
||||
#define cli() noInterrupts()
|
||||
#define sei() interrupts()
|
||||
|
||||
// New symbol for the default I2C port ---------------------------------------------------------------
|
||||
#include <Wire.h>
|
||||
#ifndef HAL_WIRE
|
||||
#define HAL_WIRE Wire
|
||||
#endif
|
||||
#ifndef HAL_WIRE_CLOCK
|
||||
#define HAL_WIRE_CLOCK 100000
|
||||
#endif
|
||||
|
||||
// Non-volatile storage ------------------------------------------------------------------------------
|
||||
#undef E2END
|
||||
#if NV_DRIVER == NV_DEFAULT
|
||||
#undef NV_DRIVER
|
||||
#if PINMAP == MaxSTM3I
|
||||
// The MaxPCB3I has an 8192 byte EEPROM built-in (rated for 5M write cycles)
|
||||
#define NV_DRIVER NV_2464
|
||||
#else
|
||||
// fall back to the DS3231/AT24C32
|
||||
#define NV_DRIVER NV_AT24C32
|
||||
#endif
|
||||
#endif
|
||||
|
||||
//--------------------------------------------------------------------------------------------------
|
||||
// Internal MCU temperature (in degrees C)
|
||||
#define HAL_TEMP() ( NAN )
|
||||
|
||||
//--------------------------------------------------------------------------------------------------
|
||||
// General purpose initialize for HAL
|
||||
#define HAL_INIT() { \
|
||||
}
|
||||
|
||||
//---------------------------------------------------------------------------------------------------
|
||||
// Misc. includes to support this processor's operation
|
||||
|
||||
// always bring in the software serial library early as strange things happen otherwise
|
||||
#include <SoftwareSerial.h>
|
||||
|
||||
// MCU reset
|
||||
#define HAL_RESET() NVIC_SystemReset()
|
||||
Executable
+80
@@ -0,0 +1,80 @@
|
||||
// Platform setup ------------------------------------------------------------------------------------
|
||||
#pragma once
|
||||
|
||||
// We define a more generic symbol, in case more STM32 boards based on different lines are supported
|
||||
#define __ARM_STM32__
|
||||
|
||||
// Base rate for critical task timing (0.0019s = 0.03", 0.2 sec/day)
|
||||
#define HAL_FRACTIONAL_SEC 526.3157895F
|
||||
|
||||
// Analog read and write
|
||||
#ifndef HAL_VCC
|
||||
#define HAL_VCC 3.3F
|
||||
#endif
|
||||
#ifndef ANALOG_READ_RANGE
|
||||
#define ANALOG_READ_RANGE 1023
|
||||
#else
|
||||
#error "Configuration (Config.h): ANALOG_READ_RANGE can't be changed on this platform"
|
||||
#endif
|
||||
#ifndef ANALOG_WRITE_RANGE
|
||||
#define ANALOG_WRITE_RANGE 255
|
||||
#endif
|
||||
|
||||
// STM32 Arduino cores (F4 + H7):
|
||||
// assume global resolution functions exist; per-pin freq/res is not generic.
|
||||
#define HAL_HAS_GLOBAL_PWM_RESOLUTION 1
|
||||
#define HAL_HAS_GLOBAL_ADC_RESOLUTION 1
|
||||
|
||||
#define HAL_PWM_BITS_MAX 16
|
||||
|
||||
// F4 ADC is 12-bit; H7 can be higher, but core support varies.
|
||||
// Default to 12 and let advanced HAL override to 16 for known-good H7 setup.
|
||||
#ifndef HAL_ADC_BITS_MAX
|
||||
#define HAL_ADC_BITS_MAX 12
|
||||
#endif
|
||||
|
||||
// Lower limit (fastest) step rate in uS for this platform (in SQW mode) and width of step pulse
|
||||
#define HAL_MAXRATE_LOWER_LIMIT 1.5
|
||||
#define HAL_PULSE_WIDTH 0 // effectively disable pulse mode
|
||||
#define HAL_FAST_PROCESSOR
|
||||
#define HAL_VFAST_PROCESSOR
|
||||
|
||||
#include <HardwareTimer.h>
|
||||
|
||||
// Interrupts
|
||||
#define cli() noInterrupts()
|
||||
#define sei() interrupts()
|
||||
|
||||
// New symbol for the default I2C port ---------------------------------------------------------------
|
||||
#include <Wire.h>
|
||||
#ifndef HAL_WIRE
|
||||
#define HAL_WIRE Wire
|
||||
#endif
|
||||
#ifndef HAL_WIRE_CLOCK
|
||||
#define HAL_WIRE_CLOCK 100000
|
||||
#endif
|
||||
|
||||
// Non-volatile storage ------------------------------------------------------------------------------
|
||||
#undef E2END
|
||||
#if NV_DRIVER == NV_DEFAULT
|
||||
#undef NV_DRIVER
|
||||
#define NV_DRIVER NV_24256
|
||||
#endif
|
||||
|
||||
//--------------------------------------------------------------------------------------------------
|
||||
// Internal MCU temperature (in degrees C)
|
||||
#define HAL_TEMP() ( NAN )
|
||||
|
||||
//--------------------------------------------------------------------------------------------------
|
||||
// General purpose initialize for HAL
|
||||
#define HAL_INIT() { \
|
||||
}
|
||||
|
||||
//---------------------------------------------------------------------------------------------------
|
||||
// Misc. includes to support this processor's operation
|
||||
|
||||
// always bring in the software serial library early as strange things happen otherwise
|
||||
#include <SoftwareSerial.h>
|
||||
|
||||
// MCU reset
|
||||
#define HAL_RESET() NVIC_SystemReset()
|
||||
Executable
+82
@@ -0,0 +1,82 @@
|
||||
// Platform setup ------------------------------------------------------------------------------------
|
||||
// Teensy3.0, 3.1, 3.2
|
||||
#pragma once
|
||||
|
||||
// We define a more generic symbol, in case more Teensy boards based on different lines are supported
|
||||
#define __TEENSYDUINO__
|
||||
|
||||
// This platform has digitalReadFast, digitalWriteFast, etc.
|
||||
#define HAL_HAS_DIGITAL_FAST
|
||||
|
||||
// Base rate for critical task timing (0.0076s = 0.11", 0.2 sec/day)
|
||||
#define HAL_FRACTIONAL_SEC 131.5789474F
|
||||
|
||||
// Analog read and write
|
||||
#ifndef HAL_VCC
|
||||
#define HAL_VCC 3.3F
|
||||
#endif
|
||||
#ifndef ANALOG_READ_RANGE
|
||||
#define ANALOG_READ_RANGE 1023
|
||||
#endif
|
||||
#ifndef ANALOG_WRITE_RANGE
|
||||
#define ANALOG_WRITE_RANGE 255
|
||||
#endif
|
||||
|
||||
// analog read/write capabilities
|
||||
#define HAL_HAS_PER_PIN_PWM_RESOLUTION 0
|
||||
#define HAL_HAS_PER_PIN_PWM_FREQUENCY 1
|
||||
#define HAL_HAS_GLOBAL_PWM_RESOLUTION 1
|
||||
#define HAL_HAS_GLOBAL_PWM_FREQUENCY 0
|
||||
#define HAL_PWM_BITS_MAX 16
|
||||
#define HAL_PWM_HZ_MAX 200000U
|
||||
|
||||
// Lower limit (fastest) step rate in uS for this platform (in SQW mode) and width of step pulse
|
||||
#if F_CPU >= 120000000
|
||||
#define HAL_MAXRATE_LOWER_LIMIT 10
|
||||
#define HAL_PULSE_WIDTH 400 // in ns, estimated
|
||||
#elif F_CPU >= 96000000
|
||||
#define HAL_MAXRATE_LOWER_LIMIT 12
|
||||
#define HAL_PULSE_WIDTH 450 // in ns, estimated
|
||||
#elif F_CPU >= 72000000
|
||||
#define HAL_MAXRATE_LOWER_LIMIT 14
|
||||
#define HAL_PULSE_WIDTH 500 // in ns, estimated
|
||||
#else
|
||||
#define HAL_MAXRATE_LOWER_LIMIT 28
|
||||
#define HAL_PULSE_WIDTH 750 // in ns, estimated
|
||||
#endif
|
||||
|
||||
// New symbol for the default I2C port -------------------------------------------------------------
|
||||
#include <Wire.h>
|
||||
#ifndef HAL_WIRE
|
||||
#define HAL_WIRE Wire
|
||||
#endif
|
||||
#ifndef HAL_WIRE_CLOCK
|
||||
#define HAL_WIRE_CLOCK 100000
|
||||
#endif
|
||||
|
||||
// Non-volatile storage ------------------------------------------------------------------------------
|
||||
#if NV_DRIVER == NV_DEFAULT
|
||||
#undef NV_DRIVER
|
||||
#define NV_DRIVER NV_EEPROM
|
||||
#endif
|
||||
|
||||
//--------------------------------------------------------------------------------------------------
|
||||
// Internal MCU temperature (in degrees C)
|
||||
#define _Tpin 38
|
||||
#define HAL_TEMP() ( (-((analog.readV(_Tpin) - 0.719F)/0.001715F) + 25.0F ) )
|
||||
|
||||
//--------------------------------------------------------------------------------------------------
|
||||
// General purpose initialize for HAL
|
||||
|
||||
#define HAL_INIT() { \
|
||||
HAL_FAST_TICKS_INIT(); \
|
||||
}
|
||||
|
||||
#define HAL_RESET() { \
|
||||
SCB_AIRCR = 0x05FA0004; \
|
||||
asm volatile ("dsb"); \
|
||||
}
|
||||
|
||||
//---------------------------------------------------------------------------------------------------
|
||||
// Misc. includes to support this processor's operation
|
||||
|
||||
Executable
+74
@@ -0,0 +1,74 @@
|
||||
// Platform setup ----------------------------------------------------------------------------------
|
||||
// Teensy3.5
|
||||
#pragma once
|
||||
|
||||
// We define a more generic symbol, in case more Teensy boards based on different lines are supported
|
||||
#define __TEENSYDUINO__
|
||||
|
||||
// This platform has digitalReadFast, digitalWriteFast, etc.
|
||||
#define HAL_HAS_DIGITAL_FAST
|
||||
|
||||
// Turn on support for using DACs to output digital signals using Arduino standard commands
|
||||
#define HAL_DAC_AS_DIGITAL
|
||||
|
||||
// Base rate for critical task timing (0.0057s = 0.09", 0.2 sec/day)
|
||||
#define HAL_FRACTIONAL_SEC 175.4385965F
|
||||
|
||||
// Analog read and write
|
||||
#ifndef HAL_VCC
|
||||
#define HAL_VCC 3.3F
|
||||
#endif
|
||||
#ifndef ANALOG_READ_RANGE
|
||||
#define ANALOG_READ_RANGE 1023
|
||||
#endif
|
||||
#ifndef ANALOG_WRITE_RANGE
|
||||
#define ANALOG_WRITE_RANGE 255
|
||||
#endif
|
||||
|
||||
// analog read/write capabilities
|
||||
#define HAL_HAS_PER_PIN_PWM_RESOLUTION 0
|
||||
#define HAL_HAS_PER_PIN_PWM_FREQUENCY 1
|
||||
#define HAL_HAS_GLOBAL_PWM_RESOLUTION 1
|
||||
#define HAL_HAS_GLOBAL_PWM_FREQUENCY 0
|
||||
#define HAL_PWM_BITS_MAX 16
|
||||
#define HAL_PWM_HZ_MAX 200000U
|
||||
|
||||
// Lower limit (fastest) step rate in uS for this platform (in SQW mode) and width of step pulse
|
||||
#define HAL_MAXRATE_LOWER_LIMIT 12
|
||||
#define HAL_PULSE_WIDTH 400 // in ns, measured 1/18/22
|
||||
#define HAL_FAST_PROCESSOR
|
||||
|
||||
// New symbol for the default I2C port -------------------------------------------------------------
|
||||
#include <Wire.h>
|
||||
#ifndef HAL_WIRE
|
||||
#define HAL_WIRE Wire1
|
||||
#endif
|
||||
#ifndef HAL_WIRE_CLOCK
|
||||
#define HAL_WIRE_CLOCK 100000
|
||||
#endif
|
||||
|
||||
// Non-volatile storage ----------------------------------------------------------------------------
|
||||
#if NV_DRIVER == NV_DEFAULT
|
||||
#undef NV_DRIVER
|
||||
#define NV_DRIVER NV_EEPROM
|
||||
#endif
|
||||
|
||||
//--------------------------------------------------------------------------------------------------
|
||||
// Internal MCU temperature (in degrees C)
|
||||
#define _Tpin 70
|
||||
#define HAL_TEMP() ( (-(analog.readV(_Tpin)-0.719F)/0.001715F)+25.0F )
|
||||
|
||||
//--------------------------------------------------------------------------------------------------
|
||||
// General purpose initialize for HAL
|
||||
|
||||
#define HAL_INIT() { \
|
||||
HAL_FAST_TICKS_INIT(); \
|
||||
}
|
||||
|
||||
#define HAL_RESET() { \
|
||||
SCB_AIRCR = 0x05FA0004; \
|
||||
asm volatile ("dsb"); \
|
||||
}
|
||||
|
||||
//---------------------------------------------------------------------------------------------------
|
||||
// Misc. includes to support this processor's operation
|
||||
Executable
+82
@@ -0,0 +1,82 @@
|
||||
// Platform setup ------------------------------------------------------------------------------------
|
||||
// Teensy3.6
|
||||
#pragma once
|
||||
|
||||
// We define a more generic symbol, in case more Teensy boards based on different lines are supported
|
||||
#define __TEENSYDUINO__
|
||||
|
||||
// This platform has digitalReadFast, digitalWriteFast, etc.
|
||||
#define HAL_HAS_DIGITAL_FAST
|
||||
|
||||
// Turn on support for using DACs to output digital signals using Arduino standard commands
|
||||
#define HAL_DAC_AS_DIGITAL
|
||||
|
||||
// Base rate for critical task timing (0.0038s = 0.06", 0.2 sec/day)
|
||||
#define HAL_FRACTIONAL_SEC 263.1578947F
|
||||
|
||||
// Analog read and write
|
||||
#ifndef HAL_VCC
|
||||
#define HAL_VCC 3.3F
|
||||
#endif
|
||||
#ifndef ANALOG_READ_RANGE
|
||||
#define ANALOG_READ_RANGE 1023
|
||||
#endif
|
||||
#ifndef ANALOG_WRITE_RANGE
|
||||
#define ANALOG_WRITE_RANGE 255
|
||||
#endif
|
||||
|
||||
// analog read/write capabilities
|
||||
#define HAL_HAS_PER_PIN_PWM_RESOLUTION 0
|
||||
#define HAL_HAS_PER_PIN_PWM_FREQUENCY 1
|
||||
#define HAL_HAS_GLOBAL_PWM_RESOLUTION 1
|
||||
#define HAL_HAS_GLOBAL_PWM_FREQUENCY 0
|
||||
#define HAL_PWM_BITS_MAX 16
|
||||
#define HAL_PWM_HZ_MAX 200000U
|
||||
|
||||
// Lower limit (fastest) step rate in uS for this platform (in SQW mode) and width of step pulse
|
||||
#if F_CPU >= 240000000
|
||||
#define HAL_MAXRATE_LOWER_LIMIT 2
|
||||
#define HAL_PULSE_WIDTH 200 // in ns, estimated
|
||||
#elif F_CPU >= 180000000
|
||||
#define HAL_MAXRATE_LOWER_LIMIT 2.6
|
||||
#define HAL_PULSE_WIDTH 300 // in ns, estimated
|
||||
#else
|
||||
#define HAL_MAXRATE_LOWER_LIMIT 4.8
|
||||
#define HAL_PULSE_WIDTH 400 // in ns, estimated
|
||||
#endif
|
||||
#define HAL_FAST_PROCESSOR
|
||||
|
||||
// New symbol for the default I2C port -------------------------------------------------------------
|
||||
#include <Wire.h>
|
||||
#ifndef HAL_WIRE
|
||||
#define HAL_WIRE Wire1
|
||||
#endif
|
||||
#ifndef HAL_WIRE_CLOCK
|
||||
#define HAL_WIRE_CLOCK 100000
|
||||
#endif
|
||||
|
||||
// Non-volatile storage ------------------------------------------------------------------------------
|
||||
#if NV_DRIVER == NV_DEFAULT
|
||||
#undef NV_DRIVER
|
||||
#define NV_DRIVER NV_EEPROM
|
||||
#endif
|
||||
|
||||
//--------------------------------------------------------------------------------------------------
|
||||
// Internal MCU temperature (in degrees C)
|
||||
#define _Tpin 70
|
||||
#define HAL_TEMP() ( (-(analog.readV(_Tpin)-0.719F)/0.001715F)+25.0F )
|
||||
|
||||
//--------------------------------------------------------------------------------------------------
|
||||
// General purpose initialize for HAL
|
||||
|
||||
#define HAL_INIT() { \
|
||||
HAL_FAST_TICKS_INIT(); \
|
||||
}
|
||||
|
||||
#define HAL_RESET() { \
|
||||
SCB_AIRCR = 0x05FA0004; \
|
||||
asm volatile ("dsb"); \
|
||||
}
|
||||
|
||||
//---------------------------------------------------------------------------------------------------
|
||||
// Misc. includes to support this processor's operation
|
||||
Executable
+77
@@ -0,0 +1,77 @@
|
||||
// Platform setup ------------------------------------------------------------------------------------
|
||||
#pragma once
|
||||
|
||||
// We define a more generic symbol, in case more Teensy boards based on different lines are supported
|
||||
#define __TEENSYDUINO__
|
||||
|
||||
// This platform has digitalReadFast, digitalWriteFast, etc.
|
||||
#define HAL_HAS_DIGITAL_FAST
|
||||
|
||||
// Base rate for critical task timing (0.0019s = 0.03", 0.2 sec/day)
|
||||
#define HAL_FRACTIONAL_SEC 526.3157895F
|
||||
|
||||
// Analog read and write
|
||||
#ifndef HAL_VCC
|
||||
#define HAL_VCC 3.3F
|
||||
#endif
|
||||
#ifndef ANALOG_READ_RANGE
|
||||
#define ANALOG_READ_RANGE 1023
|
||||
#endif
|
||||
#ifndef ANALOG_WRITE_RANGE
|
||||
#define ANALOG_WRITE_RANGE 255
|
||||
#endif
|
||||
|
||||
// analog read/write capabilities
|
||||
#define HAL_HAS_PER_PIN_PWM_RESOLUTION 0
|
||||
#define HAL_HAS_PER_PIN_PWM_FREQUENCY 1
|
||||
#define HAL_HAS_GLOBAL_PWM_RESOLUTION 1
|
||||
#define HAL_HAS_GLOBAL_PWM_FREQUENCY 0
|
||||
#define HAL_PWM_BITS_MAX 16
|
||||
#define HAL_PWM_HZ_MAX 200000U
|
||||
|
||||
// Lower limit (fastest) step rate in uS for this platform (in SQW mode) and width of step pulse
|
||||
#define HAL_MAXRATE_LOWER_LIMIT 1.5
|
||||
#define HAL_PULSE_WIDTH 0 // effectively disable pulse mode
|
||||
#define HAL_FAST_PROCESSOR
|
||||
#define HAL_VFAST_PROCESSOR
|
||||
|
||||
// New symbol for the default I2C port -------------------------------------------------------------
|
||||
#include <Wire.h>
|
||||
#ifndef HAL_WIRE
|
||||
#define HAL_WIRE Wire
|
||||
#endif
|
||||
#ifndef HAL_WIRE_CLOCK
|
||||
#define HAL_WIRE_CLOCK 100000
|
||||
#endif
|
||||
|
||||
// Non-volatile storage ------------------------------------------------------------------------------
|
||||
#if NV_DRIVER == NV_DEFAULT
|
||||
#undef NV_DRIVER
|
||||
#define NV_DRIVER NV_EEPROM
|
||||
#endif
|
||||
|
||||
//--------------------------------------------------------------------------------------------------
|
||||
// Internal MCU temperature (in degrees C)
|
||||
#define HAL_TEMP() ( tempmonGetTemp() )
|
||||
|
||||
//--------------------------------------------------------------------------------------------------
|
||||
// General purpose initialize for HAL
|
||||
|
||||
#define HAL_INIT() { \
|
||||
HAL_FAST_TICKS_INIT(); \
|
||||
}
|
||||
|
||||
#define HAL_RESET() { \
|
||||
SCB_AIRCR = 0x05FA0004; \
|
||||
asm volatile ("dsb"); \
|
||||
}
|
||||
|
||||
//---------------------------------------------------------------------------------------------------
|
||||
// Misc. includes to support this processor's operation
|
||||
|
||||
#ifdef EmptyStr
|
||||
#undef EmptyStr
|
||||
#endif
|
||||
#define EmptyStr "\1"
|
||||
|
||||
#define CAT_ATTR PROGMEM
|
||||
Executable
+77
@@ -0,0 +1,77 @@
|
||||
// Platform setup ------------------------------------------------------------------------------------
|
||||
#pragma once
|
||||
|
||||
// We define a more generic symbol, in case more Teensy boards based on different lines are supported
|
||||
#define __TEENSYDUINO__
|
||||
|
||||
// This platform has digitalReadFast, digitalWriteFast, etc.
|
||||
#define HAL_HAS_DIGITAL_FAST
|
||||
|
||||
// Base rate for critical task timing (0.0019s = 0.03", 0.2 sec/day)
|
||||
#define HAL_FRACTIONAL_SEC 526.3157895F
|
||||
|
||||
// Analog read and write
|
||||
#ifndef HAL_VCC
|
||||
#define HAL_VCC 3.3F
|
||||
#endif
|
||||
#ifndef ANALOG_READ_RANGE
|
||||
#define ANALOG_READ_RANGE 1023
|
||||
#endif
|
||||
#ifndef ANALOG_WRITE_RANGE
|
||||
#define ANALOG_WRITE_RANGE 255
|
||||
#endif
|
||||
|
||||
// analog read/write capabilities
|
||||
#define HAL_HAS_PER_PIN_PWM_RESOLUTION 0
|
||||
#define HAL_HAS_PER_PIN_PWM_FREQUENCY 1
|
||||
#define HAL_HAS_GLOBAL_PWM_RESOLUTION 1
|
||||
#define HAL_HAS_GLOBAL_PWM_FREQUENCY 0
|
||||
#define HAL_PWM_BITS_MAX 16
|
||||
#define HAL_PWM_HZ_MAX 200000U
|
||||
|
||||
// Lower limit (fastest) step rate in uS for this platform (in SQW mode) and width of step pulse
|
||||
#define HAL_MAXRATE_LOWER_LIMIT 1.5
|
||||
#define HAL_PULSE_WIDTH 0 // effectively disable pulse mode
|
||||
#define HAL_FAST_PROCESSOR
|
||||
#define HAL_VFAST_PROCESSOR
|
||||
|
||||
// New symbol for the default I2C port -------------------------------------------------------------
|
||||
#include <Wire.h>
|
||||
#ifndef HAL_WIRE
|
||||
#define HAL_WIRE Wire
|
||||
#endif
|
||||
#ifndef HAL_WIRE_CLOCK
|
||||
#define HAL_WIRE_CLOCK 100000
|
||||
#endif
|
||||
|
||||
// Non-volatile storage ------------------------------------------------------------------------------
|
||||
#if NV_DRIVER == NV_DEFAULT
|
||||
#undef NV_DRIVER
|
||||
#define NV_DRIVER NV_EEPROM
|
||||
#endif
|
||||
|
||||
//--------------------------------------------------------------------------------------------------
|
||||
// Internal MCU temperature (in degrees C)
|
||||
#define HAL_TEMP() ( tempmonGetTemp() )
|
||||
|
||||
//--------------------------------------------------------------------------------------------------
|
||||
// General purpose initialize for HAL
|
||||
|
||||
#define HAL_INIT() { \
|
||||
HAL_FAST_TICKS_INIT(); \
|
||||
}
|
||||
|
||||
#define HAL_RESET() { \
|
||||
SCB_AIRCR = 0x05FA0004; \
|
||||
asm volatile ("dsb"); \
|
||||
}
|
||||
|
||||
//---------------------------------------------------------------------------------------------------
|
||||
// Misc. includes to support this processor's operation
|
||||
|
||||
#ifdef EmptyStr
|
||||
#undef EmptyStr
|
||||
#endif
|
||||
#define EmptyStr "\1"
|
||||
|
||||
#define CAT_ATTR PROGMEM
|
||||
Reference in New Issue
Block a user