init
This commit is contained in:
Executable
+82
@@ -0,0 +1,82 @@
|
||||
// Platform setup ------------------------------------------------------------------------------------
|
||||
// Teensy3.0, 3.1, 3.2
|
||||
#pragma once
|
||||
|
||||
// We define a more generic symbol, in case more Teensy boards based on different lines are supported
|
||||
#define __TEENSYDUINO__
|
||||
|
||||
// This platform has digitalReadFast, digitalWriteFast, etc.
|
||||
#define HAL_HAS_DIGITAL_FAST
|
||||
|
||||
// Base rate for critical task timing (0.0076s = 0.11", 0.2 sec/day)
|
||||
#define HAL_FRACTIONAL_SEC 131.5789474F
|
||||
|
||||
// Analog read and write
|
||||
#ifndef HAL_VCC
|
||||
#define HAL_VCC 3.3F
|
||||
#endif
|
||||
#ifndef ANALOG_READ_RANGE
|
||||
#define ANALOG_READ_RANGE 1023
|
||||
#endif
|
||||
#ifndef ANALOG_WRITE_RANGE
|
||||
#define ANALOG_WRITE_RANGE 255
|
||||
#endif
|
||||
|
||||
// analog read/write capabilities
|
||||
#define HAL_HAS_PER_PIN_PWM_RESOLUTION 0
|
||||
#define HAL_HAS_PER_PIN_PWM_FREQUENCY 1
|
||||
#define HAL_HAS_GLOBAL_PWM_RESOLUTION 1
|
||||
#define HAL_HAS_GLOBAL_PWM_FREQUENCY 0
|
||||
#define HAL_PWM_BITS_MAX 16
|
||||
#define HAL_PWM_HZ_MAX 200000U
|
||||
|
||||
// Lower limit (fastest) step rate in uS for this platform (in SQW mode) and width of step pulse
|
||||
#if F_CPU >= 120000000
|
||||
#define HAL_MAXRATE_LOWER_LIMIT 10
|
||||
#define HAL_PULSE_WIDTH 400 // in ns, estimated
|
||||
#elif F_CPU >= 96000000
|
||||
#define HAL_MAXRATE_LOWER_LIMIT 12
|
||||
#define HAL_PULSE_WIDTH 450 // in ns, estimated
|
||||
#elif F_CPU >= 72000000
|
||||
#define HAL_MAXRATE_LOWER_LIMIT 14
|
||||
#define HAL_PULSE_WIDTH 500 // in ns, estimated
|
||||
#else
|
||||
#define HAL_MAXRATE_LOWER_LIMIT 28
|
||||
#define HAL_PULSE_WIDTH 750 // in ns, estimated
|
||||
#endif
|
||||
|
||||
// New symbol for the default I2C port -------------------------------------------------------------
|
||||
#include <Wire.h>
|
||||
#ifndef HAL_WIRE
|
||||
#define HAL_WIRE Wire
|
||||
#endif
|
||||
#ifndef HAL_WIRE_CLOCK
|
||||
#define HAL_WIRE_CLOCK 100000
|
||||
#endif
|
||||
|
||||
// Non-volatile storage ------------------------------------------------------------------------------
|
||||
#if NV_DRIVER == NV_DEFAULT
|
||||
#undef NV_DRIVER
|
||||
#define NV_DRIVER NV_EEPROM
|
||||
#endif
|
||||
|
||||
//--------------------------------------------------------------------------------------------------
|
||||
// Internal MCU temperature (in degrees C)
|
||||
#define _Tpin 38
|
||||
#define HAL_TEMP() ( (-((analog.readV(_Tpin) - 0.719F)/0.001715F) + 25.0F ) )
|
||||
|
||||
//--------------------------------------------------------------------------------------------------
|
||||
// General purpose initialize for HAL
|
||||
|
||||
#define HAL_INIT() { \
|
||||
HAL_FAST_TICKS_INIT(); \
|
||||
}
|
||||
|
||||
#define HAL_RESET() { \
|
||||
SCB_AIRCR = 0x05FA0004; \
|
||||
asm volatile ("dsb"); \
|
||||
}
|
||||
|
||||
//---------------------------------------------------------------------------------------------------
|
||||
// Misc. includes to support this processor's operation
|
||||
|
||||
Executable
+74
@@ -0,0 +1,74 @@
|
||||
// Platform setup ----------------------------------------------------------------------------------
|
||||
// Teensy3.5
|
||||
#pragma once
|
||||
|
||||
// We define a more generic symbol, in case more Teensy boards based on different lines are supported
|
||||
#define __TEENSYDUINO__
|
||||
|
||||
// This platform has digitalReadFast, digitalWriteFast, etc.
|
||||
#define HAL_HAS_DIGITAL_FAST
|
||||
|
||||
// Turn on support for using DACs to output digital signals using Arduino standard commands
|
||||
#define HAL_DAC_AS_DIGITAL
|
||||
|
||||
// Base rate for critical task timing (0.0057s = 0.09", 0.2 sec/day)
|
||||
#define HAL_FRACTIONAL_SEC 175.4385965F
|
||||
|
||||
// Analog read and write
|
||||
#ifndef HAL_VCC
|
||||
#define HAL_VCC 3.3F
|
||||
#endif
|
||||
#ifndef ANALOG_READ_RANGE
|
||||
#define ANALOG_READ_RANGE 1023
|
||||
#endif
|
||||
#ifndef ANALOG_WRITE_RANGE
|
||||
#define ANALOG_WRITE_RANGE 255
|
||||
#endif
|
||||
|
||||
// analog read/write capabilities
|
||||
#define HAL_HAS_PER_PIN_PWM_RESOLUTION 0
|
||||
#define HAL_HAS_PER_PIN_PWM_FREQUENCY 1
|
||||
#define HAL_HAS_GLOBAL_PWM_RESOLUTION 1
|
||||
#define HAL_HAS_GLOBAL_PWM_FREQUENCY 0
|
||||
#define HAL_PWM_BITS_MAX 16
|
||||
#define HAL_PWM_HZ_MAX 200000U
|
||||
|
||||
// Lower limit (fastest) step rate in uS for this platform (in SQW mode) and width of step pulse
|
||||
#define HAL_MAXRATE_LOWER_LIMIT 12
|
||||
#define HAL_PULSE_WIDTH 400 // in ns, measured 1/18/22
|
||||
#define HAL_FAST_PROCESSOR
|
||||
|
||||
// New symbol for the default I2C port -------------------------------------------------------------
|
||||
#include <Wire.h>
|
||||
#ifndef HAL_WIRE
|
||||
#define HAL_WIRE Wire1
|
||||
#endif
|
||||
#ifndef HAL_WIRE_CLOCK
|
||||
#define HAL_WIRE_CLOCK 100000
|
||||
#endif
|
||||
|
||||
// Non-volatile storage ----------------------------------------------------------------------------
|
||||
#if NV_DRIVER == NV_DEFAULT
|
||||
#undef NV_DRIVER
|
||||
#define NV_DRIVER NV_EEPROM
|
||||
#endif
|
||||
|
||||
//--------------------------------------------------------------------------------------------------
|
||||
// Internal MCU temperature (in degrees C)
|
||||
#define _Tpin 70
|
||||
#define HAL_TEMP() ( (-(analog.readV(_Tpin)-0.719F)/0.001715F)+25.0F )
|
||||
|
||||
//--------------------------------------------------------------------------------------------------
|
||||
// General purpose initialize for HAL
|
||||
|
||||
#define HAL_INIT() { \
|
||||
HAL_FAST_TICKS_INIT(); \
|
||||
}
|
||||
|
||||
#define HAL_RESET() { \
|
||||
SCB_AIRCR = 0x05FA0004; \
|
||||
asm volatile ("dsb"); \
|
||||
}
|
||||
|
||||
//---------------------------------------------------------------------------------------------------
|
||||
// Misc. includes to support this processor's operation
|
||||
Executable
+82
@@ -0,0 +1,82 @@
|
||||
// Platform setup ------------------------------------------------------------------------------------
|
||||
// Teensy3.6
|
||||
#pragma once
|
||||
|
||||
// We define a more generic symbol, in case more Teensy boards based on different lines are supported
|
||||
#define __TEENSYDUINO__
|
||||
|
||||
// This platform has digitalReadFast, digitalWriteFast, etc.
|
||||
#define HAL_HAS_DIGITAL_FAST
|
||||
|
||||
// Turn on support for using DACs to output digital signals using Arduino standard commands
|
||||
#define HAL_DAC_AS_DIGITAL
|
||||
|
||||
// Base rate for critical task timing (0.0038s = 0.06", 0.2 sec/day)
|
||||
#define HAL_FRACTIONAL_SEC 263.1578947F
|
||||
|
||||
// Analog read and write
|
||||
#ifndef HAL_VCC
|
||||
#define HAL_VCC 3.3F
|
||||
#endif
|
||||
#ifndef ANALOG_READ_RANGE
|
||||
#define ANALOG_READ_RANGE 1023
|
||||
#endif
|
||||
#ifndef ANALOG_WRITE_RANGE
|
||||
#define ANALOG_WRITE_RANGE 255
|
||||
#endif
|
||||
|
||||
// analog read/write capabilities
|
||||
#define HAL_HAS_PER_PIN_PWM_RESOLUTION 0
|
||||
#define HAL_HAS_PER_PIN_PWM_FREQUENCY 1
|
||||
#define HAL_HAS_GLOBAL_PWM_RESOLUTION 1
|
||||
#define HAL_HAS_GLOBAL_PWM_FREQUENCY 0
|
||||
#define HAL_PWM_BITS_MAX 16
|
||||
#define HAL_PWM_HZ_MAX 200000U
|
||||
|
||||
// Lower limit (fastest) step rate in uS for this platform (in SQW mode) and width of step pulse
|
||||
#if F_CPU >= 240000000
|
||||
#define HAL_MAXRATE_LOWER_LIMIT 2
|
||||
#define HAL_PULSE_WIDTH 200 // in ns, estimated
|
||||
#elif F_CPU >= 180000000
|
||||
#define HAL_MAXRATE_LOWER_LIMIT 2.6
|
||||
#define HAL_PULSE_WIDTH 300 // in ns, estimated
|
||||
#else
|
||||
#define HAL_MAXRATE_LOWER_LIMIT 4.8
|
||||
#define HAL_PULSE_WIDTH 400 // in ns, estimated
|
||||
#endif
|
||||
#define HAL_FAST_PROCESSOR
|
||||
|
||||
// New symbol for the default I2C port -------------------------------------------------------------
|
||||
#include <Wire.h>
|
||||
#ifndef HAL_WIRE
|
||||
#define HAL_WIRE Wire1
|
||||
#endif
|
||||
#ifndef HAL_WIRE_CLOCK
|
||||
#define HAL_WIRE_CLOCK 100000
|
||||
#endif
|
||||
|
||||
// Non-volatile storage ------------------------------------------------------------------------------
|
||||
#if NV_DRIVER == NV_DEFAULT
|
||||
#undef NV_DRIVER
|
||||
#define NV_DRIVER NV_EEPROM
|
||||
#endif
|
||||
|
||||
//--------------------------------------------------------------------------------------------------
|
||||
// Internal MCU temperature (in degrees C)
|
||||
#define _Tpin 70
|
||||
#define HAL_TEMP() ( (-(analog.readV(_Tpin)-0.719F)/0.001715F)+25.0F )
|
||||
|
||||
//--------------------------------------------------------------------------------------------------
|
||||
// General purpose initialize for HAL
|
||||
|
||||
#define HAL_INIT() { \
|
||||
HAL_FAST_TICKS_INIT(); \
|
||||
}
|
||||
|
||||
#define HAL_RESET() { \
|
||||
SCB_AIRCR = 0x05FA0004; \
|
||||
asm volatile ("dsb"); \
|
||||
}
|
||||
|
||||
//---------------------------------------------------------------------------------------------------
|
||||
// Misc. includes to support this processor's operation
|
||||
Executable
+77
@@ -0,0 +1,77 @@
|
||||
// Platform setup ------------------------------------------------------------------------------------
|
||||
#pragma once
|
||||
|
||||
// We define a more generic symbol, in case more Teensy boards based on different lines are supported
|
||||
#define __TEENSYDUINO__
|
||||
|
||||
// This platform has digitalReadFast, digitalWriteFast, etc.
|
||||
#define HAL_HAS_DIGITAL_FAST
|
||||
|
||||
// Base rate for critical task timing (0.0019s = 0.03", 0.2 sec/day)
|
||||
#define HAL_FRACTIONAL_SEC 526.3157895F
|
||||
|
||||
// Analog read and write
|
||||
#ifndef HAL_VCC
|
||||
#define HAL_VCC 3.3F
|
||||
#endif
|
||||
#ifndef ANALOG_READ_RANGE
|
||||
#define ANALOG_READ_RANGE 1023
|
||||
#endif
|
||||
#ifndef ANALOG_WRITE_RANGE
|
||||
#define ANALOG_WRITE_RANGE 255
|
||||
#endif
|
||||
|
||||
// analog read/write capabilities
|
||||
#define HAL_HAS_PER_PIN_PWM_RESOLUTION 0
|
||||
#define HAL_HAS_PER_PIN_PWM_FREQUENCY 1
|
||||
#define HAL_HAS_GLOBAL_PWM_RESOLUTION 1
|
||||
#define HAL_HAS_GLOBAL_PWM_FREQUENCY 0
|
||||
#define HAL_PWM_BITS_MAX 16
|
||||
#define HAL_PWM_HZ_MAX 200000U
|
||||
|
||||
// Lower limit (fastest) step rate in uS for this platform (in SQW mode) and width of step pulse
|
||||
#define HAL_MAXRATE_LOWER_LIMIT 1.5
|
||||
#define HAL_PULSE_WIDTH 0 // effectively disable pulse mode
|
||||
#define HAL_FAST_PROCESSOR
|
||||
#define HAL_VFAST_PROCESSOR
|
||||
|
||||
// New symbol for the default I2C port -------------------------------------------------------------
|
||||
#include <Wire.h>
|
||||
#ifndef HAL_WIRE
|
||||
#define HAL_WIRE Wire
|
||||
#endif
|
||||
#ifndef HAL_WIRE_CLOCK
|
||||
#define HAL_WIRE_CLOCK 100000
|
||||
#endif
|
||||
|
||||
// Non-volatile storage ------------------------------------------------------------------------------
|
||||
#if NV_DRIVER == NV_DEFAULT
|
||||
#undef NV_DRIVER
|
||||
#define NV_DRIVER NV_EEPROM
|
||||
#endif
|
||||
|
||||
//--------------------------------------------------------------------------------------------------
|
||||
// Internal MCU temperature (in degrees C)
|
||||
#define HAL_TEMP() ( tempmonGetTemp() )
|
||||
|
||||
//--------------------------------------------------------------------------------------------------
|
||||
// General purpose initialize for HAL
|
||||
|
||||
#define HAL_INIT() { \
|
||||
HAL_FAST_TICKS_INIT(); \
|
||||
}
|
||||
|
||||
#define HAL_RESET() { \
|
||||
SCB_AIRCR = 0x05FA0004; \
|
||||
asm volatile ("dsb"); \
|
||||
}
|
||||
|
||||
//---------------------------------------------------------------------------------------------------
|
||||
// Misc. includes to support this processor's operation
|
||||
|
||||
#ifdef EmptyStr
|
||||
#undef EmptyStr
|
||||
#endif
|
||||
#define EmptyStr "\1"
|
||||
|
||||
#define CAT_ATTR PROGMEM
|
||||
Executable
+77
@@ -0,0 +1,77 @@
|
||||
// Platform setup ------------------------------------------------------------------------------------
|
||||
#pragma once
|
||||
|
||||
// We define a more generic symbol, in case more Teensy boards based on different lines are supported
|
||||
#define __TEENSYDUINO__
|
||||
|
||||
// This platform has digitalReadFast, digitalWriteFast, etc.
|
||||
#define HAL_HAS_DIGITAL_FAST
|
||||
|
||||
// Base rate for critical task timing (0.0019s = 0.03", 0.2 sec/day)
|
||||
#define HAL_FRACTIONAL_SEC 526.3157895F
|
||||
|
||||
// Analog read and write
|
||||
#ifndef HAL_VCC
|
||||
#define HAL_VCC 3.3F
|
||||
#endif
|
||||
#ifndef ANALOG_READ_RANGE
|
||||
#define ANALOG_READ_RANGE 1023
|
||||
#endif
|
||||
#ifndef ANALOG_WRITE_RANGE
|
||||
#define ANALOG_WRITE_RANGE 255
|
||||
#endif
|
||||
|
||||
// analog read/write capabilities
|
||||
#define HAL_HAS_PER_PIN_PWM_RESOLUTION 0
|
||||
#define HAL_HAS_PER_PIN_PWM_FREQUENCY 1
|
||||
#define HAL_HAS_GLOBAL_PWM_RESOLUTION 1
|
||||
#define HAL_HAS_GLOBAL_PWM_FREQUENCY 0
|
||||
#define HAL_PWM_BITS_MAX 16
|
||||
#define HAL_PWM_HZ_MAX 200000U
|
||||
|
||||
// Lower limit (fastest) step rate in uS for this platform (in SQW mode) and width of step pulse
|
||||
#define HAL_MAXRATE_LOWER_LIMIT 1.5
|
||||
#define HAL_PULSE_WIDTH 0 // effectively disable pulse mode
|
||||
#define HAL_FAST_PROCESSOR
|
||||
#define HAL_VFAST_PROCESSOR
|
||||
|
||||
// New symbol for the default I2C port -------------------------------------------------------------
|
||||
#include <Wire.h>
|
||||
#ifndef HAL_WIRE
|
||||
#define HAL_WIRE Wire
|
||||
#endif
|
||||
#ifndef HAL_WIRE_CLOCK
|
||||
#define HAL_WIRE_CLOCK 100000
|
||||
#endif
|
||||
|
||||
// Non-volatile storage ------------------------------------------------------------------------------
|
||||
#if NV_DRIVER == NV_DEFAULT
|
||||
#undef NV_DRIVER
|
||||
#define NV_DRIVER NV_EEPROM
|
||||
#endif
|
||||
|
||||
//--------------------------------------------------------------------------------------------------
|
||||
// Internal MCU temperature (in degrees C)
|
||||
#define HAL_TEMP() ( tempmonGetTemp() )
|
||||
|
||||
//--------------------------------------------------------------------------------------------------
|
||||
// General purpose initialize for HAL
|
||||
|
||||
#define HAL_INIT() { \
|
||||
HAL_FAST_TICKS_INIT(); \
|
||||
}
|
||||
|
||||
#define HAL_RESET() { \
|
||||
SCB_AIRCR = 0x05FA0004; \
|
||||
asm volatile ("dsb"); \
|
||||
}
|
||||
|
||||
//---------------------------------------------------------------------------------------------------
|
||||
// Misc. includes to support this processor's operation
|
||||
|
||||
#ifdef EmptyStr
|
||||
#undef EmptyStr
|
||||
#endif
|
||||
#define EmptyStr "\1"
|
||||
|
||||
#define CAT_ATTR PROGMEM
|
||||
Reference in New Issue
Block a user