/* * Title OnStepX * by Howard Dutton * * Copyright (C) 2021-2026 Howard Dutton * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see . * * Description: * Full featured telescope control for * Equatorial and Alt-Az mounts * Rotator * Focusers * Accessories (automatic covers, dew heaters, etc.) * * Author: Howard Dutton * http://www.stellarjourney.com * hjd1964@gmail.com * * Revision history, and newer versions: * See GitHub: https://github.com/hjd1964/OnStep * * Documentation: * https://groups.io/g/onstep/wiki/home * * Discussion, Questions, ...etc * https://groups.io/g/onstep */ // Use tabs "Config..." to configure OnStep to your requirements // Firmware version ---------------------------------------------------------------------------------------------------------------- #define FirmwareName "On-Step" #define FirmwareVersionMajor 10 #define FirmwareVersionMinor 28 // minor version 00 to 99 #define FirmwareVersionPatch "i" // for example major.minor patch: 10.03c #define FirmwareVersionConfig 6 // internal, for tracking configuration file changes #include "src/Common.h" #include "src/Validate.h" #include "src/lib/nv/Nv.h" #include "src/lib/analog/Analog.h" #include "src/lib/sense/Sense.h" #include "src/lib/tasks/OnTask.h" #include "src/telescope/Telescope.h" extern Telescope telescope; #include "src/plugins/Plugins.config.h" #if DEBUG == PROFILER extern void profiler(); #endif void sensesPoll() { sense.poll(); } void setup() { //pinMode(SHARED_ENABLE_PIN, OUTPUT); //digitalWrite(SHARED_ENABLE_PIN, HIGH); #if ADDON_SELECT_PIN != OFF pinMode(ADDON_SELECT_PIN, OUTPUT); digitalWrite(ADDON_SELECT_PIN, HIGH); #endif #if DEBUG != OFF SERIAL_DEBUG.begin(SERIAL_DEBUG_BAUD); delay(2000); #endif // let any special processing the pinmap needs happen #ifdef PIN_INIT PIN_INIT(); #endif // say hello VLF(""); VF("MSG: OnStepX, version "); V(FirmwareVersionMajor); V("."); V(FirmwareVersionMinor); VL(FirmwareVersionPatch); VF("MSG: OnStepX, MCU "); VLF(MCU_STR); VF("MSG: OnStepX, pinmap "); VLF(PINMAP_STR); // start low level hardware VLF("MSG: System, HAL initialize"); HAL_INIT(); WIRE_INIT(); analog.begin(); nv().setGate(&xBusy); if (!nv().init()) { DLF("ERR: Setup, NV (EEPROM/FRAM/Flash/etc.) device not found!"); } delay(2000); #if defined(NV_WIPE) && NV_WIPE == ON nv().wipe(); #endif // start input sense polling task int pollingRate = round((1000.0F/HAL_FRACTIONAL_SEC)/2.0F); if (pollingRate < 1) pollingRate = 1; VF("MSG: System, start input sense service task (rate "); V(pollingRate); VF("ms priority 7)... "); if (tasks.add(pollingRate, 0, true, 7, sensesPoll, "SysSens")) { VLF("success"); } else { VLF("FAILED!"); } // start telescope object telescope.init(FirmwareName, FirmwareVersionMajor, FirmwareVersionMinor, FirmwareVersionPatch, FirmwareVersionConfig); // start command channel tasks commandChannelInit(); tasks.yield(2000); // start any plugins #if PLUGIN1 != OFF PLUGIN1.init(); #endif #if PLUGIN2 != OFF PLUGIN2.init(); #endif #if PLUGIN3 != OFF PLUGIN3.init(); #endif #if PLUGIN4 != OFF PLUGIN4.init(); #endif #if PLUGIN5 != OFF PLUGIN5.init(); #endif #if PLUGIN6 != OFF PLUGIN6.init(); #endif #if PLUGIN7 != OFF PLUGIN7.init(); #endif #if PLUGIN8 != OFF PLUGIN8.init(); #endif // start task manager debug events #if DEBUG == PROFILER tasks.add(142, 0, true, 7, profiler, "Profilr"); #endif sense.poll(); telescope.ready = true; } void loop() { tasks.yield(); }